2 layers83 × 39 mm
MicArray
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
87 parts3
2 layers83 × 39 mm
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
- Size
- 83 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 58
- Pads
- 210
- Tracks, vias
- 295, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Jan 2018
- Updated
- 12 May 2018
Overview
MicArray is an open-source printed circuit board by dylanzodrow, from the dylanzodrow/Aerial_Drone_Tracking repository on GitHub. It is a 2-layer board of 83 × 39 mm with 71 parts on 58 nets, routed with 295 tracks and 0 vias.
It is built around the SN74HC138D and ICS-52000. Its parts include 24 diodes, 8 capacitors, 5 resistors, 1 IC and 1 connector.
Main components
2
SN74HC138D
SOIC-16-40℃~+85℃ 2V~6V 3/8 31ns@6V,50pF 5.2mA 5.2mA 74HC 80uA Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
ICS-52000
LGA-7(4x3)-26dB 1.5mA 1.62V~3.63V 1mm 3mm 4mm 65dB Omnidirectional Omnidirectional pickup LGA-7(4x3) MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
README
Kicad5/readme.mdHopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Jumper | Wire_Connections_Bridges:WireConnection_0.80mmDrill | JP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP23 +8 |
| 24 | LED | LEDs:LED_0603 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 8 | ICS-52000 | KiKadCustLib:ICS25000 | Mic1, Mic2, Mic3, Mic4, Mic5, Mic6, Mic7, Mic8 |
| 7 | .1u | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4, C5, C6, C7 |
| 3 | 220 | Resistors_SMD:R_0603 | R3, R9, R11 |
| 2 | 1k | Resistors_SMD:R_0603 | R1, R2 |
| 1 | .1u | Capacitors_SMD:C_0603_HandSoldering | C8 |
| 1 | Conn_01x12_Male | Connectors:he10-14d | J1 |
| 1 | SN74HC138 | Resistors_SMD:R_Cat16-8 | U2 |
Questions
How big is the MicArray PCB?
It measures 83 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicArray use?
71 parts, built around the SN74HC138D and ICS-52000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicArray KiCad files?
From the dylanzodrow/Aerial_Drone_Tracking repository on GitHub, at the commit this page was made from: the board is Kicad2/MicArray.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicArray design in my own project?
Its repository states no licence, so its author keeps all rights: ask dylanzodrow before reusing the design.
More from dylanzodrow/Aerial_Drone_Tracking
5- 2 layers83 × 39 mm
MicArrayPro
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
63 parts3 - 2 layers83 × 39 mm
MicArrayFinal
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
41 parts3 - 2 layers93 × 90 mm
MicArray
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
18 parts3 - 2 layers20 × 11 mm
MicTest
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.
4 parts3
Similar boards
- 2 layers55.6 × 32.3 mm
Frosty flake clone
inventowiz/frosty-flake-clone
Clone of bpiphany's Frosty Flake, but based on his Voice-of-Reason PCB
19 parts - 4 layers51.1 × 50 mm
- 2 layers140 × 88.6 mm
Highway wave
rrrenai/wave
These headphones utilize an FPGA, I2S MEMS microphones, and scrap headphone drivers. The FPGA and RPI work in tandem to collect and process incoming signals real time, seamlessly upgrading the listening experience.
43 partsMIT - 2 layers105 × 105 mm
Neopixel
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
71 parts915 - 2 layers71 × 25 mm
- 2 layers60 × 37 mm
HydraBus
hydrabus/hydrabus
HydraBus open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware
71 parts359 - 2 layers142.5 × 106.3 mm
Allium58
beekeeb/Allium58
The Allium58 is created based on the Lily58 Pro, designed to enhance wireless capabilities and provide compatibility with GLP (Gateron Low Profile) hotswap sockets.
71 parts246 - 2 layers164.7 × 58.4 mm
