2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers50.1 × 16 mm
Right lp
Dygmalab/right-lpLicensed under CERN-OHL and distributed as is without any additional warranty or documentation.
- Size
- 50.1 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 14
- Pads
- 46
- Tracks, vias
- 171, 16
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170922)
- Created
- 16 Apr 2019
- Updated
- 23 Nov 2020
Overview
Right lp is an open-source printed circuit board by Dygmalab, from the Dygmalab/right-lp repository on GitHub. It is a 2-layer board of 50.1 × 16 mm with 12 parts on 14 nets, routed with 171 tracks and 16 vias.
Its parts include 5 connectors, 2 diodes and 2 switches.
README
README.mdright-lp
Right side lower part PCB of the Dygma Raise keyboard
Licensed under CERN-OHL and distributed as is without any additional warranty or documentation.
Usefull links
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X01 | raise_fp:MountingHole_2.3mm_Pad | P2, P3 |
| 2 | CONN_01X01 | raise_fp:Fiducial_0.5mm_Dia_1mm_Outer | P4, P5 |
| 2 | reverse 4 pin RGB led, com anode | raise_fp:3528-4p-rev | rgb-69, rgb-70 |
| 2 | small signal diode, 100mA | raise_fp:D_SOD-123 | D1, D2 |
| 1 | 4 pin RGB led, com anode | raise_fp:3528-4p | rgb-68 |
| 1 | FPC 10 way connector, 0.5mm pitch, right angle, bottom contact | raise_fp:FPC_10_2046 | P1 |
| 1 | kailh hot plug sockets low profile | raise_fp:kailhsocketlowprofile | SW1 |
| 1 | kailh hot plug sockets low profile | raise_fp:kailhsocketlowprofile-right-lp | SW2 |
Questions
How big is the Right lp PCB?
It measures 50.1 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right lp use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right lp KiCad files?
From the Dygmalab/right-lp repository on GitHub, at the commit this page was made from: the board is right-lp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right lp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dygmalab before reusing the design.
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696