4 layers60 × 94 mm
DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT
2 layers94 × 55.9 mm
SynthSlate Cora Carrier
dyavitz/SynthSlateA standalone instrument that turns a drawn waveform into playable sound. Lives entirely on a Zynq SoC.
- Size
- 94 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 46
- Pads
- 71
- Tracks, vias
- 65, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Oct 2026
- Updated
- 9 Oct 2026
Overview
SynthSlate Cora Carrier is an open-source printed circuit board by dyavitz, from the dyavitz/SynthSlate repository on GitHub, published under the MIT licence. It is a 2-layer board of 94 × 55.9 mm with 11 parts on 46 nets, routed with 65 tracks and 34 vias.
It is built around the H11L1. Its parts include 5 connectors, 2 resistors, 1 IC and 1 diode.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Cora IO | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J4, J5 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | H11L1 | Package_DIP:DIP-6_W7.62mm | U1 |
| 1 | ILI9488 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J8 |
Questions
How big is the SynthSlate Cora Carrier PCB?
It measures 94 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SynthSlate Cora Carrier use?
11 parts, built around the H11L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SynthSlate Cora Carrier KiCad files?
From the dyavitz/SynthSlate repository on GitHub, at the commit this page was made from: the board is kicad/SynthSlate_Cora_Carrier.kicad_pcb and its schematic kicad/SynthSlate_Cora_Carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SynthSlate Cora Carrier design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers64.3 × 56 mm
Mt32-pi midi hat
chris-jh/mt32-pi-midi-hat
A Raspberry Pi Midi Hat for the project mt32-pi by Dale Whinham (https://github.com/dwhinham/mt32-pi)
22 parts139GPL-3.0 - 2 layers100 × 100 mm
- 2 layers152.4 × 68.6 mm
Pico test synth2
todbot/pico_test_synth
Simple board to help make synths with Raspberry Pi Pico/Pico2 and PCM5102 I2S DAC
55 parts57MIT - 2 layers51.3 × 96.2 mm
Minisynth32
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
32 parts45CC-BY-SA-4.0 - 2 layers13 × 1.4 mm
PicoX7
SloeComputers/picoX7
Software simulation of the Yamaha DX7 with a MIDI interface for the Raspberry Pi Pico
31 parts43MIT - 4 layers71 × 100 mm
Oscar components
dchwebb/Oscar
Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU
71 parts42Unlicense