
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

ESPHome config and 3D design models for blind automation
Power pcb is an open-source printed circuit board by dwmw2, from the dwmw2/PD-Stepper-Blinds repository on GitHub. It is a 2-layer board of 26.1 × 22.7 mm with 6 parts on 3 nets, routed with 22 tracks and 5 vias.
The custom power distribution PCB is an optional component that provides two key features:
KiCad project files are located in the power-pcb/ directory. Gerber and drill files for fabrication are available in power-pcb/Gerber/.
You can assemble this yourself, but the spring terminals are hard to solder manually. There are plenty of PCB assembly services which will do it for you; I happened to use JLCPCB. For a walk-through of the JLCPCB ordering process for the uninitiated, see JLCPCB.md.

The power PCB is designed to make contact with the back of the PD-Stepper board, using the terminals shown.

The JST-PH socket is fitted at right angles to the board with its pins laying flat on the copper, so manufacturers like JLCPCB won't be able to build that. Using the Jig as shown to position the socket and PCB, solder them by hand. Don't do it with the PD-Stepper board in place like in the picture. Sandwich the PCB and socket between the Jig parts and screw it together to hold it in place while you solder.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x01_Pin | Library:HARWIN_S1761-46R | GND, NTC, VBUS |
| 1 | Conn_01x03_Pin | Library:JST_S3B-PH-SM4-TB_LF__SN_ | J1 |
The 4 most common of 6 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 26.1 × 22.7 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dwmw2/PD-Stepper-Blinds repository on GitHub, at the commit this page was made from: the board is power-pcb/power-pcb.kicad_pcb and its schematic power-pcb/power-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dwmw2 before reusing the design.