
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

Using Raspberry Pi Pico to produce programmable pulses for modular synthesizers
Pico pulse gen is an open-source printed circuit board by dwmorrin, from the dwmorrin/pico-pulse-gen repository on GitHub. It is a 2-layer board of 100 × 100 mm with 58 parts on 64 nets, routed with 249 tracks and 0 vias.
It is built around the EG1218. Its parts include 17 resistors, 15 diodes, 13 switches, 4 connectors and 2 capacitors. It belongs with the RP2040 boards of this library.
thanks to ncarandini/KiCad-PR-Pico for the KiCad pico files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 820 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 5 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15, R16, R17 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 1N4001 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D14, D15 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | 10n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2 |
| 1 | 330n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | CLK_LED | LED_THT:LED_D3.0mm | D12 |
| 1 | D_Schottky | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D13 |
| 1 | EG1218 | slide-switch:slide_switch_e61218 | SW7 |
| 1 | EXT_CLK | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | LM78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | MOTM_PWR | connector_motm:connector_motm | J1 |
| 1 | OUT1_BTN | Button_Switch_THT:SW_PUSH_6mm | SW11 |
| 1 | OUT1_LED | LED_THT:LED_D3.0mm | D9 |
| 1 | OUT2_BTN | Button_Switch_THT:SW_PUSH_6mm | SW12 |
| 1 | OUT2_LED | LED_THT:LED_D3.0mm | D10 |
| 1 | OUT3_BTN | Button_Switch_THT:SW_PUSH_6mm | SW13 |
| 1 | OUT3_LED | LED_THT:LED_D3.0mm | D11 |
| 1 | OUT_CON | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | P1_BTN | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | P1_LED | LED_THT:LED_D3.0mm | D1 |
| 1 | P2_BTN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | P2_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | P3_BTN | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | P3_LED | LED_THT:LED_D3.0mm | D3 |
| 1 | P4_BTN | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | P4_LED | LED_THT:LED_D3.0mm | D4 |
| 1 | P5_BTN | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | P5_LED | LED_THT:LED_D3.0mm | D5 |
| 1 | P6_BTN | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | P6_LED | LED_THT:LED_D3.0mm | D6 |
| 1 | P7_BTN | Button_Switch_THT:SW_PUSH_6mm | SW9 |
| 1 | P7_LED | LED_THT:LED_D3.0mm | D7 |
| 1 | P8_BTN | Button_Switch_THT:SW_PUSH_6mm | SW10 |
| 1 | P8_LED | LED_THT:LED_D3.0mm | D8 |
| 1 | PWR_CON | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW8 |

doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


futureshocked/KLP4e_Breadboard-Power-Supply
This is the repository for the "4x8x8 LED Matric Clock" project.

oskitone/poly555
The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

unknownusername504/WirelessMouse
A wireless mouse with open source pcb/schematic as well as drivers to come.

0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

ajvizganapathy-pixel/FlipperZero-DIY-STM32WB55-NucleusDark
DIY Flipper Zero clone using STM32WB55CGU6 — KiCad PCB, Momentum firmware, 200+ apps, BadUSB scripts, wiring diagrams
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dwmorrin/pico-pulse-gen repository on GitHub, at the commit this page was made from: the board is pcb/pico-pulse-gen.kicad_pcb and its schematic pcb/pico-pulse-gen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dwmorrin before reusing the design.