2 layers20.5 × 24.8 mm
2 layers36.8 × 44.4 mm
6S1PChargeConnector
dwilliams/6S1PChargeConnectorA quick little board to make connecting 6 LiPo cells to a charger easier.
- Size
- 36.8 × 44.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 19
- Pads
- 33
- Tracks, vias
- 28, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Oct 2015
- Updated
- 20 Oct 2015
Overview
6S1PChargeConnector is an open-source printed circuit board by dwilliams, from the dwilliams/6S1PChargeConnector repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 36.8 × 44.4 mm with 8 parts on 19 nets, routed with 28 tracks and 0 vias.
It belongs with the power boards of this library.
README
README.md6S1PChargeConnector
A quick little board to make connecting 6 LiPo cells to a charger easier.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BATT 1 | JST Connectors:JST-PH-2 | P8 |
| 1 | BATT 2 | JST Connectors:JST-PH-2 | P7 |
| 1 | BATT 3 | JST Connectors:JST-PH-2 | P6 |
| 1 | BATT 4 | JST Connectors:JST-PH-2 | P5 |
| 1 | BATT 5 | JST Connectors:JST-PH-2 | P4 |
| 1 | BATT 6 | JST Connectors:JST-PH-2 | P3 |
| 1 | CHARGE | Connectors LEMO:ECG.0B.307 | P1 |
| 1 | OUT | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the 6S1PChargeConnector PCB?
It measures 36.8 × 44.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 6S1PChargeConnector use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 6S1PChargeConnector KiCad files?
From the dwilliams/6S1PChargeConnector repository on GitHub, at the commit this page was made from: the board is 6s1pchargeconnector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 6S1PChargeConnector design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).