
Flight Controller
desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.

Half Life Week 1: Design PCB
Week1 is an open-source printed circuit board by DVeldhurthi, from the DVeldhurthi/halflifeweek1 repository on GitHub. It is a 4-layer board of 60 × 60 mm with 77 parts on 109 nets, routed with 815 tracks and 89 vias.
It is built around the STM32H743VIT6, BMP390 and W25Q128JVSIQ, with the AP2112K-3.3, AP7361C-33E and ICM-42688-P among its other parts. Its parts include 25 capacitors, 24 resistors, 8 connectors, 7 ICs and 6 diodes. It belongs with the STM32 boards of this library.

Earlier two-layer BeginnerFC layout. The current CAD files in this repository are the four-layer Week1 design.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C7, C8, C9, C15, C17, C18, C20, C21, C22, C23, C24, C25 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6, R7, R8 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R9, R10, R12, R14, R16, R18 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R11, R13, R15, R17 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24 |
| 4 | MountingHole_3.2mm_M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C13, C14, C16 |
| 3 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C19 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D3, D4 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | D5, D6 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D2 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ASE-8.000MHZ-LC-T | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | BMP390 | Week1:BMP390 | U5 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | CRSF UART7 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J7 |
| 1 | ESC SIGNALS | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J4 |
| 1 | GPS UART2 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J5 |
| 1 | I2C1 / 3.3 V | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J8 |
| 1 | ICM-42688-P | Week1:ICM-42688-P | U4 |
| 1 | POWER / ADC | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | STM32H743VIT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | TELEMETRY UART3 | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J6 |
| 1 | USB MICRO-B | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U6 |

desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.

Xerolux/IDM-Smart-Climate-Platform
Diese Platine empfängt Temperatur- und Feuchtewerte aus Home Assistant und simuliert gegenüber der IDM AERO ALM den originalen Temperatur-/Feuchtesensor.

damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.

thejamesrhodes/Hyades-Flight-Computer
Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket

hpvdt/falcon_motherboard
Firmware and hardware designs for the Falcon motherboard

ukinori/flightcontroller
STM32H743 VTOL/fixed-wing flight-controller hardware in KiCad 10: routed 4-layer PCB, schematics, BOM notes, connector pinouts and verification reports. Experimental prototype; PX4 port planned.

sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB

sarahjuma1/STM32-Flight-Controller-PCB-Copy
4-layer STM32F405-based flight controller PCB featuring IMU, barometer, SPI flash, USB-C, and ESC interfaces.
It measures 60 × 60 mm and has 4 copper layers, 1.6 mm thick.
77 parts, built around the STM32H743VIT6, BMP390, W25Q128JVSIQ and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DVeldhurthi/halflifeweek1 repository on GitHub, at the commit this page was made from: the board is Week1.kicad_pcb and its schematic Core.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DVeldhurthi before reusing the design.