2 layers66.9 × 74.5 mm
2 layers25.4 × 33 mm
E73-breakout
ducky64/e73-breakoutE73-2G4M04S1(A/B) breakout board, in a breadboardable form factor with a 10-pin 1.27mm-pitch SWD header
- Size
- 25.4 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 41
- Pads
- 114
- Tracks, vias
- 233, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Mar 2019
- Updated
- 29 Mar 2019
Overview
E73-breakout is an open-source printed circuit board by ducky64, from the ducky64/e73-breakout repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 25.4 × 33 mm with 20 parts on 41 nets, routed with 233 tracks and 51 vias.
Its parts include 4 capacitors, 4 connectors, 2 resistors, 2 switches and 2 inductors. It belongs with the interfaces and adapters boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 4pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 15nH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 1k | Resistor_SMD:R_Array_Concave_4x0603 | RN1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2x3mm | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1 |
| 1 | 3x4mm | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | E73-2G4M04S-52810 | RF_Module:E73-2G4M04S | U1 |
| 1 | LED_ARGB | e73-breakout:LED_RGB_0606 | D1 |
| 1 | Pin | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J3 |
| 1 | Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Pin | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J4 |
| 1 | SolderJumper_2_Open | e73-breakout:SolderJumper-0402 | JP1 |
| 1 | Symbol | e73-breakout:SymbolIdDots | H2 |
| 1 | Symbol | e73-breakout:SymbolLeadFree | H1 |
Questions
How big is the E73-breakout PCB?
It measures 25.4 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E73-breakout use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E73-breakout KiCad files?
From the ducky64/e73-breakout repository on GitHub, at the commit this page was made from: the board is e73-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the E73-breakout design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772