
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

pcb for our melty brain in KiCad with high g accelerometer
MeltyBrain1kg5 is an open-source printed circuit board by DublerIno, from the DublerIno/meltybrain_pcb repository on GitHub. It is a 2-layer board of 30 × 72.5 mm with 25 parts on 29 nets, routed with 252 tracks and 31 vias.
Its parts include 7 connectors, 6 resistors, 4 capacitors and 2 diodes.
first iteration of our pcb for melty brain
we are using esp32s3 supermini and high g H3LIS331DL accelerometr.
to fix:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 2 | H3LIS331DLTR | accelerometer:LIS3DHTR | AC1, AC2 |
| 2 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | LED_strip | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Left Pins | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Right Pins | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | motor_esc_left | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | motor_esc_right | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | receiver_connector | Connectors_JST:JST_SH_BM04B-SRSS-TB_04x1.00mm_Straight | J3 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 30 × 72.5 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DublerIno/meltybrain_pcb repository on GitHub, at the commit this page was made from: the board is MeltyBrain1kg5.kicad_pcb and its schematic MeltyBrain1kg5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DublerIno before reusing the design.