Skip to the content
2 layers100 × 60 mmBindingPosts, the printed circuit board in 3D

A Custom 5.1 LM3886 Based Custom Amplifier

Size
100 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
15
Pads
40
Tracks, vias
0, 0
Pours
15
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
6 Jan 2023
Updated
23 Feb 2025

Overview

BindingPosts is an open-source printed circuit board by duanestorey, from the duanestorey/hifi-amplifier repository on GitHub. It is a 2-layer board of 100 × 60 mm with 25 parts on 15 nets.

Its parts include 5 resistors, 5 connectors and 5 inductors.

README

README.md

Hifi-Amplifier

A Custom 5.1 LM3886 Based Custom Amplifier. The LM3886 has a somewhat mythical status ever since a $3,000 gaincard was released in 1999. It had amazing sound quality, but inside was only a tweaked LM3886 Texas Instrument 68W amplifier IC. Since then, an entire community has evolved around these 'gainclones', which truly are hi-fidelity. This project uses 5 of these, along with a Dolby Decoder IC, to create a complete DIY hi-fidelity 5.1 system.

A breakdown of the directory structure is as follows:

  • PCBs - Each of the required PCBs in detail
  • Code/ESP32 - The main amplifier code, written to run on an ESP32 WROOM 32 processor - currently a work in progress and incomplete as the code has recently been changed from a STM32

Design Philosophy

PCBs

After iterations over several months to determine PCB usefulness and sizes, most PCBs now utilize a 55mmx55mm size. This is under the minimum of 100mmx100mm low-cost options at several of the large-scale PCB manufacturing sites, and allows useful stacking of PCBs within the chassis.

Parts

25
QtyValueFootprintReferences
10MountingHole_PadMountingHole:MountingHole_4.3mm_M4_DIN965_PadH1, H2, H3, H4, H5, H6, H7, H8, H9, H10
50.7uInductor_THT:L_Axial_L26.0mm_D10.0mm_P30.48mm_Horizontal_Fastron_77AL1, L2, L3, L4, L5
510RResistor_THT:R_Axial_Power_L25.0mm_W6.4mm_P27.94mmR1, R2, R3, R4, R5
5Conn_01x02_MaleConnector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_VerticalJ1, J2, J3, J4, J5

More from duanestorey/hifi-amplifier

12
  • 2 layers100 × 100 mmCrossover, the printed circuit board in 3D

    Crossover

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    298 parts3
  • 2 layers95 × 55 mmDolbyDecoder, the printed circuit board in 3D

    DolbyDecoder

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    160 parts3
  • 2 layers95 × 55 mmDolbyDecoder, the printed circuit board in 3D

    DolbyDecoder

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    134 parts3
  • 2 layers55 × 95 mmUProcessor, the printed circuit board in 3D

    UProcessor

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    109 parts3
  • 2 layers100 × 90 mmStreamer, the printed circuit board in 3D

    Streamer

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    99 parts3
  • 2 layers65 × 95 mmDualPSU, the printed circuit board in 3D

    DualPSU

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    97 parts3
  • 4 layers95 × 55 mmCS8416-PCB5122, the printed circuit board in 3D

    CS8416-PCB5122

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    92 parts3
  • 4 layers85 × 55 mmDSP, the printed circuit board in 3D

    DSP

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    87 parts3
  • 2 layers55 × 55 mmDolbyDecoder, the printed circuit board in 3D

    DolbyDecoder

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    85 parts3
  • 4 layers85 × 55 mmInputSel, the printed circuit board in 3D

    InputSel

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    82 parts3
  • 4 layers65 × 55 mmChannelSelector, the printed circuit board in 3D

    ChannelSelector

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    79 parts3
  • 2 layers55 × 95 mmUProcessor, the printed circuit board in 3D

    UProcessor

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    76 parts3

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the BindingPosts PCB?

It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BindingPosts use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BindingPosts KiCad files?

From the duanestorey/hifi-amplifier repository on GitHub, at the commit this page was made from: the board is PCBs/1/BindingPosts/1.0/BindingPosts.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BindingPosts design in my own project?

Its repository states no licence, so its author keeps all rights: ask duanestorey before reusing the design.