
DMXtoMotionPCB V3
dtpisanty/dmx2motion
An open-hardware project to control varing frequency AC motror drivers through DMX, ArtNet, OSC and MQTT

An open-hardware project to control varing frequency AC motror drivers through DMX, ArtNet, OSC and MQTT
ScreenModule is an open-source printed circuit board by dtpisanty, from the dtpisanty/dmx2motion repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 50 mm with 11 parts on 6 nets, routed with 24 tracks and 0 vias.
Its parts include 1 capacitor, 1 IC and 1 connector.
An ESP32 based open-hardware project to control varing frequency AC motror drivers through DMX, ArtNet, OSC and MQTT
Schematics and PCB files were created using DIP Trace
This project uses Lukas Salomons ESP32-DMX Library https://github.com/luksal/ESP32-DMX and ThingPulse's ssd1306 OLED driver https://github.com/ThingPulse/esp8266-oled-ssd1306
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | PAD | screenModule:PAD_PAD2 | PAD2, PAD3, PAD4, PAD6, PAD7, PAD8 |
| 1 | 4.7uF | screenModule:CAPPR-2.54_5.08 | C1 |
| 1 | HDR-1X6 | screenModule:HDR-1x6 | J1 |
| 1 | OLED SSD1306 128X64 | screenModule:OLED_SSD1306 | U1 |
| 1 | PAD | screenModule:PAD | PAD5 |
| 1 | PAD | screenModule:PAD_PAD1 | PAD1 |

dtpisanty/dmx2motion
An open-hardware project to control varing frequency AC motror drivers through DMX, ArtNet, OSC and MQTT

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 40 × 50 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dtpisanty/dmx2motion repository on GitHub, at the commit this page was made from: the board is circuitboard/KiCad/ScreenModule_V1/screenModule.kicad_pcb and its schematic circuitboard/KiCad/DMXtoMotionPCB_V3/DMXtoMotionPCB_V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).