2 layers200 × 100 mm
Polykit x monosynth
polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer
167 parts94
2 layers23.8 × 25.1 mm
Led dimmer
dsiroky/led_dimmerSimple and compact 12 V LED dimmer
- Size
- 23.8 × 25.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 10
- Pads
- 34
- Tracks, vias
- 69, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 4 Feb 2014
- Updated
- 27 Feb 2014
Overview
Led dimmer is an open-source printed circuit board by dsiroky, from the dsiroky/led_dimmer repository on GitHub, published under the MIT licence. It is a 2-layer board of 23.8 × 25.1 mm with 13 parts on 10 nets, routed with 69 tracks and 7 vias.
It is built around the BAS85. Its parts include 4 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 IC.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | ds:sm0805 | C2, C4 |
| 2 | BAS85 | ds:minimelf | D1, D2 |
| 2 | CONN_2 | ds:ark550_2ex | P1, P2 |
| 1 | 100 | ds:sm0805 | R2 |
| 1 | 10n | ds:sm0805 | C3 |
| 1 | 1k | ds:sm0805 | R1 |
| 1 | 220u/16V | ds:cpol_3.5_8 | C1 |
| 1 | 50k | ds:pot_5mm | RV1 |
| 1 | 555 | ds:so8e | U1 |
| 1 | MOSFET_N | ds:sot23_gds | Q1 |
Questions
How big is the Led dimmer PCB?
It measures 23.8 × 25.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led dimmer use?
13 parts, built around the BAS85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led dimmer KiCad files?
From the dsiroky/led_dimmer repository on GitHub, at the commit this page was made from: the board is led_dimmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led dimmer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers50.3 × 25.8 mm
- 4 layers100.5 × 61.3 mm
TanfolyamRobot
legokor/TanfolyamRobot
Korábban az STMicroelectronics által biztosított STM32CubeIDE-t használtuk a firmware fejlesztéséhez, azonban ez egy elég nehézkes és lassú eszköz.
79 parts2 - 2 layers90 × 90 mm
- 2 layers37 × 56 mm
Photometer3
meltissia/Dual-Channel-LSPR-Photometer
Двоканальний LSPR-фотометр: проектування PCB під змішані сигнали та низькорівнева C-прошивка на ESP-IDF з потоковим DSP.
49 parts - 2 layers50 × 160 mm
Polykit x inputboard
polykit/polykit-x-inputboard
Input board for my 8-voice polyphonic synthesizer
80 parts - 2 layers68 × 100 mm
- 4 layers170 × 100 mm
