Skip to the content
4 layers32 × 50 mmAq lcd grab, the printed circuit board in 3D
Size
32 × 50 mm
Copper layers
4
Thickness
1.6 mm
Parts
39
Nets
61
Pads
209
Tracks, vias
847, 132
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 May 2026
Updated
30 Sep 2026

Overview

Aq lcd grab is an open-source printed circuit board by drinkcat, from the drinkcat/aq-lcd-grab repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 32 × 50 mm with 39 parts on 61 nets, routed with 847 tracks and 132 vias.

It is built around the STM32F103C8T6, FH26W-39S-0.3SHW(60) and KT-0603R. Its parts include 12 resistors, 10 capacitors, 5 connectors, 2 ICs and 1 diode. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

3

Parts

39
QtyValueFootprintReferences
90Resistor_SMD:R_0402_1005MetricR10, R11, R12, R13, R14, R15, R16, R17, R18
6100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C8
4ToolingHoleMountingHole:ToolingHole_1.152mmH1, H2, H3, H4
3TestPointtest_points:TestPoint_Pad_0.5x0.5mmTP1, TP2, TP3
210kResistor_SMD:R_0402_1005MetricR1, R2
2FH26W-39S-0.3SHW(60)FH26W:FH26W39S03SHW60J1, J2
1100uCapacitor_SMD:C_1206_3216MetricC11
11kResistor_SMD:R_0402_1005MetricR3
11uCapacitor_SMD:C_0402_1005MetricC6
122uCapacitor_SMD:C_0805_2012MetricC10
14.7uCapacitor_SMD:C_0402_1005MetricC7
1Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1Conn_01x03_SocketConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_01x14esp32c6:XIAO-ESP32-C6-DIPU2
1KT-0603RLED_SMD:LED_0603_1608MetricD1
1LOGOlogo:logo-2cmv2
1LOGOlogo:logo-8mmv2
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1

Similar boards

  • 4 layers100 × 62.5 mmOmniframe Hardware, the printed circuit board in 3D

    Omniframe Hardware

    omniframe-art/Omniframe-Hardware

    Omniframe is an open source e-paper digital frame. This repository includes the source and fabrication files for the main and secondary boards for driving the 13.3" Monochrome e-ink display.

    104 parts4
  • 2 layers80 × 60 mmIRIS C5 RevC, the printed circuit board in 3D

    IRIS C5 RevC

    Benv-B/photo-frame-hardware

    Open hardware carrier for an AirDrop ChLCD color e-paper frame: XIAO ESP32-C5, NFC wake, KiCad, schematic, BOM and Gerbers. CERN-OHL-P-2.0.

    66 partsCERN-OHL-P-2.0
  • 4 layers65 × 56 mmRPi OLED Adapter, the printed circuit board in 3D

    RPi OLED Adapter

    RasmusB/RPi-OLED

    Adapter board for using a generic OLED with a Raspberry Pi

    35 parts
  • 4 layers32 × 26 mmNeurband main, the printed circuit board in 3D

    Neurband main

    jlcjak/neurband

    Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.

    60 parts46
  • 2 layers26.6 × 17.9 mmAdapter, the printed circuit board in 3D

    Adapter

    pdyxs/glider

    Fork of zephray/glider (Modos Glider e-ink monitor) with a DP AUX polarity fix and a standalone GCC firmware build

    2 partsCERN-OHL-S-2.0
  • 2 layers65 × 40 mmRS485 V4, the printed circuit board in 3D

    RS485 V4

    jiazhengfu912-lang/STM32-Isolated-RS485-DevBoard

    STM32F103C8T6 isolated RS485 development board: KiCad schematic, PCB, 3D previews and engineering validation

    63 parts
  • 4 layers50 × 50 mmSTMF103C8T6 Dev Board, the printed circuit board in 3D

    STMF103C8T6 Dev Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    52 parts915

Questions

How big is the Aq lcd grab PCB?

It measures 32 × 50 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Aq lcd grab use?

39 parts, built around the STM32F103C8T6, FH26W-39S-0.3SHW(60) and KT-0603R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aq lcd grab KiCad files?

From the drinkcat/aq-lcd-grab repository on GitHub, at the commit this page was made from: the board is pcb/aq_lcd_grab.kicad_pcb and its schematic pcb/aq_lcd_grab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aq lcd grab design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).