

CTP interposer
DIY Thermal Camera
- Size
- 10.7 × 30.4 mm
- Copper layers
- 2
- Thickness
- 0.2 mm
- Parts
- 2
- Nets
- 6
- Pads
- 14
- Tracks, vias
- 30, 46
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Sep 2023
- Updated
- 18 Sep 2026
Overview
CTP interposer is an open-source printed circuit board by drewsum, from the drewsum/Thermal_Camera repository on GitHub. It is a 2-layer board of 10.7 × 30.4 mm with 2 parts on 6 nets, routed with 30 tracks and 46 vias.
README
README.mdThermal_Camera
DIY Thermal Camera - Drew Maatman and Michael Laffin
Hardware:
KiCad Project:
\Thermal_Camera\rev_a\hdw\Thermal_Camera Made in KiCad version 8.0.5 PIC32MZ DA Grphics MCU FLIR Lepton 3.5 Thermal Imagery Sensor PIC32MZ DA is programmed with firmware via PICKIT4 Header (J1501) PIC32MZ DA can be held in reset by pressing SW1501 or by inserting jumper across J1502 USB Hub can be reset by pressing SW2501 SPI FLASH can be programmed via J2002
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LCD CTP Data | Custom Footprints Library:GCT_FFC2B35-06-G_REVA2 | J2102, J2102 |
More from drewsum/Thermal_Camera
1- 8 layers100 × 100 mm

Similar boards
- 2 layers37 × 19 mm

Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm

- 2 layers

Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm

L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm

SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm

ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers

Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm

Questions
How big is the CTP interposer PCB?
It measures 10.7 × 30.4 mm and has 2 copper layers, 0.2 mm thick.
What parts does the CTP interposer use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CTP interposer KiCad files?
From the drewsum/Thermal_Camera repository on GitHub, at the commit this page was made from: the board is rev_a/hdw/CTP_interposer/CTP_interposer/CTP_interposer.kicad_pcb and its schematic rev_a/hdw/CTP_interposer/CTP_interposer/CTP_interposer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CTP interposer design in my own project?
Its repository states no licence, so its author keeps all rights: ask drewsum before reusing the design.