2 layers
2 layers30.5 × 83.2 mm
Avbay
drahosj/avionicsOpen-source rocketry avionics
- Size
- 30.5 × 83.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 84
- Pads
- 269
- Tracks, vias
- 1,237, 127
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Oct 2014
- Updated
- 27 Jun 2015
Overview
Avbay is an open-source printed circuit board by drahosj, from the drahosj/avionics repository on GitHub. It is a 2-layer board of 30.5 × 83.2 mm with 64 parts on 84 nets, routed with 1,237 tracks and 127 vias.
It is built around the LT1376IS8-5#PBF, MIC5209-3.3YS and BSS138DW, with the DMN2041LSD among its other parts. Its parts include 15 resistors, 14 capacitors, 9 connectors, 8 diodes and 5 ICs. It belongs with the STM32 boards of this library.
Main components
4
LT1376IS8-5#PBF
SOP-8-40℃~+125℃@(TJ) 1 1.5A 500kHz 5V 5V~25V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSAnalog DevicesDC-DC Converters
MIC5209-3.3YS
SOT-223-3-40℃~+125℃ 1 16V 170uA 3.3V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138DW
SOT-363-55℃~+150℃ 1.5V 2 N-Channel 200mA 200mW 25pF 3.5Ω@10V 50V 50pF 8pF SOT-363 MOSFETs ROHSDiodes IncorporatedMOSFETs
DMN2041LSD
SO-8-55℃~+150℃ 1.16W 1.2V 15.6nC 2 N-Channel 20V 28mΩ@4.5V 550pF 7.63A 81pF SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdRequires the KiCad libraries from https://github.com/aerodynelabs/kicadlib. Clone that repository into the same directory as this repository.
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | Resistors_SMD:R_0805_HandSoldering | R5, R8, R9, R10, R11, R12, R13, R14, R15 |
| 5 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9, C10 |
| 5 | 48 | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R7 |
| 5 | LED | LEDs:LED-0805 | D1, D2, D3, D4, D6 |
| 3 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C3, C11, C14 |
| 2 | Local:MOUNTING_HOLE_3mm | , | |
| 2 | 100NF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | BSS138DW | Housings_SOT-23_SOT-143_TSOT-6:SC70-6_Handsoldering | Q2, Q4 |
| 2 | DIODE | Diodes_SMD:Diode-MELF_Handsoldering | D5, D8 |
| 2 | DMN2041LSD | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | Q1, Q3 |
| 2 | TERM_BLOCK_2.54MM_2POS | Local:TERM_BLOCK_2 | P1, P6 |
| 2 | TERM_BLOCK_2.54MM_5POS | Local:TERM_BLOCK_5 | P4, P5 |
| 1 | .01uF | Capacitors_SMD:C_0805_HandSoldering | C12 |
| 1 | 100uF | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_HandSoldering | C13 |
| 1 | 180 | Resistors_SMD:R_0805_HandSoldering | R16 |
| 1 | 20uH | Capacitors_SMD:C_2220_HandSoldering | L1 |
| 1 | 3.3nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | ADXL375 | Local:ADXL375-EXT | U5 |
| 1 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_2x01 | P8 |
| 1 | CONN_6 | Socket_Strips:Socket_Strip_Straight_1x06 | P2 |
| 1 | DIODESCH | Diodes_SMD:Diode-MELF_Handsoldering | D7 |
| 1 | Ferrite | SMD_Packages:SMD-1206 | FB1 |
| 1 | JUMPER | SMD_Packages:SMD-0805 | JP1 |
| 1 | LT1376IS8-5 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | MIC5209-3.3 | SMD_Packages:SOT-223 | U2 |
| 1 | MS5611 | Local:MS5611-EXT | U4 |
| 1 | MicroSD | Ian:MICRO_SD_HINGE_AMP | J1 |
| 1 | NPN | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | Q5 |
| 1 | SPEAKER | Local:CBT-07427 | SP1 |
| 1 | STM32F411RE_LQFP64 | Housings_QFP:TQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | SW_PUSH | Local:SW_SMD | SW2 |
| 1 | SW_PUSH | Local:SW_SMD_MICRO | SW3 |
| 1 | TERM_BLOCK_2.54MM_8POS | Local:TERM_BLOCK_8 | P7 |
| 1 | TERM_BLOCK_2.54MM_8POS | Socket_Strips:Socket_Strip_Straight_1x08 | P3 |
More from drahosj/avionics
1Similar boards
- 2 layers70 × 40 mm
Led driver
j9brown/led-driver
Drives 4 RGB/W LEDs with PWM for a total of up to 3 A controlled over an I2C bus.
34 partsMIT - 2 layers93 × 87 mm
- 2 layers64.9 × 38.1 mm
MSPM0L1105 Dev Board
sarthakchikte0312/MSPM0L1105_Dev_Board
Custom MSPM0L1105 development board designed in KiCad with USB, UART, SWD, and GPIO support.
50 parts - 2 layers59 × 59 mm
Cours Univ 2025 v1
B1jam1-74/Projet_Ruche_groupe_1
Le microcontrôleur fait interface avec les capteurs (HX711 + DS18B20) et le module LoRa, qui pousse les trames vers une gateway LoRaWAN puis un serveur web.
43 partsMIT - 2 layers169.9 × 108.7 mm
- 4 layers140.6 × 108.1 mm
- 2 layers98.4 × 60.3 mm
- 4 layers30 × 30 mm
Nikon GPS
MaizeShark/Nikon-NMEA-Pro
low-power GNSS logger and BLE remote shutter for Nikon cameras
79 parts
Questions
How big is the Avbay PCB?
It measures 30.5 × 83.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Avbay use?
64 parts, built around the LT1376IS8-5#PBF, MIC5209-3.3YS, BSS138DW and DMN2041LSD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avbay KiCad files?
From the drahosj/avionics repository on GitHub, at the commit this page was made from: the board is Hardware/avbay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avbay design in my own project?
Its repository states no licence, so its author keeps all rights: ask drahosj before reusing the design.