Skip to the content
2 layers100 × 99.8 mmMacro pad, the printed circuit board in 3D

My macro pad for the hackpad ysws

Size
100 × 99.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
26
Pads
123
Tracks, vias
224, 5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Jun 2025
Updated
19 Jun 2025

Overview

Macro pad is an open-source printed circuit board by dragonruler1000, from the dragonruler1000/PrimordiaBoard repository on GitHub. It is a 2-layer board of 100 × 99.8 mm with 27 parts on 26 nets, routed with 224 tracks and 5 vias.

Its parts include 13 switches, 12 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md


Visitor Counter

Primordiaboard

Hello! This is my submission for Hackpad! It was made for Hackpad v3.

Features

  • A big 0.91" OLED screen
  • Some custom silkscreen art
  • 12 full MX-style keyswitches
  • KMK firmware support!

PCB

Here are pictures of my PCB:

SchematicPCB

✅ DRC was run with 0 errors

CAD

Designed using FreeCAD and TinkerCAD (it was painful...).

The case fits together with 4x M3 screws and bolts.

Firmware

The firmware is written in KMK and included in this repo.

⚠️ There may be additional setup required for KMK—see KMK Docs for more info.

Bill of Materials (BOM)

  • 1x Seeed XIAO RP2040
  • 12x MX-style keyswitches
  • 12x 1N4148 diodes
  • 1x SSD1306 128x32 OLED (5V VCC, 3.3V logic, I2C)
  • 4x M3x16mm screws
  • 4x M3 heat-set inserts (5mm x 4mm)
  • 1x 3D printed

Parts

27
QtyValueFootprintReferences
121N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D20, D21, D22, D23, D24, D29, D30, D31, D32
12SW_Push_45degButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12
1Conn_01x04_PinOLED:SSD1306-0.91-OLED-4pin-128x32J1
1RotaryEncoderRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW13
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Macro pad PCB?

It measures 100 × 99.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Macro pad use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Macro pad KiCad files?

From the dragonruler1000/PrimordiaBoard repository on GitHub, at the commit this page was made from: the board is PCB/macro_pad.kicad_pcb and its schematic PCB/Libraries/OPL_Kicad_Library-master/Grove Vision AI V2 Library/Grove - Vision AI Module V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Macro pad design in my own project?

Its repository states no licence, so its author keeps all rights: ask dragonruler1000 before reusing the design.