
SOM
fsnitz/CcSoM
An open source system on chip based on the GateMate FPGA from Cologne Chip (Supports: CCGM1A1 & CCGM1A2)

RVP TopeltKell is an open-source printed circuit board by dr3san, from the dr3san/RVP-TopeltKell repository on GitHub. It is a 2-layer board of 106 × 91 mm with 86 parts on 90 nets, routed with 827 tracks and 68 vias.
It is built around the ESP32-S3-WROOM-1-N4, AP62200WU and DRV8428RTE, with the TLV4961-1M, 74HCT4851D and 74LVC2G53DC among its other parts. Its parts include 29 capacitors, 19 resistors, 16 connectors, 11 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C6, C8, C12, C14, C16, C18, C19, C20, C21, C28, C29 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R9, R10, R11, R13, R14, R16, R17, R18, R19, R20 |
| 12 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14 |
| 5 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C10, C11, C15 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C7, C22, C25 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C26 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R15 |
| 2 | 330n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C9 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R12 |
| 2 | 470n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C27 |
| 2 | 74HCT4851 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U8, U9 |
| 2 | AP62200 | Topeltkell:TSOT26 | U1, U2 |
| 2 | DRV8428 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm | U10, U11 |
| 2 | JST XH 5 pin | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J15, J16 |
| 2 | TLV4961 | Package_TO_SOT_THT:TO-92S | U5, U6 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 31k6 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 3u3 | Inductor_SMD:L_7.3x7.3_H3.5 | L2 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 4u7 | Inductor_SMD:L_Wuerth_WE-PD-Typ-7345 | L1 |
| 1 | 52k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 74LVC2G53 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U7 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | ESP32-S3-WROOM-1-N4 | RF_Module:ESP32-S3-WROOM-1 | U4 |
| 1 | LED_DEGUG | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | LED_POWER | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_USB | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D2 |
| 1 | SW_RESET | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1 |
| 1 | USB_B_Mini | Topeltkell:USB_Mini_B | J2 |

fsnitz/CcSoM
An open source system on chip based on the GateMate FPGA from Cologne Chip (Supports: CCGM1A1 & CCGM1A2)





UVicRocketry/A2AV-1-CAMERA_PCB-
PCB for controlling and powering camera onboard anduril 2


It measures 106 × 91 mm and has 2 copper layers, 1.6 mm thick.
86 parts, built around the ESP32-S3-WROOM-1-N4, AP62200WU, DRV8428RTE and TLV4961-1M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dr3san/RVP-TopeltKell repository on GitHub, at the commit this page was made from: the board is skeem/RVP_TopeltKell.kicad_pcb and its schematic skeem/RVP_TopeltKell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dr3san before reusing the design.