2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
2 layers34.1 × 62.8 mm
RatTrapSensorPCB
dqmcdonald/RatTrapSensorPCBPCB For Rat Trap Sensor
- Size
- 34.1 × 62.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 30
- Pads
- 75
- Tracks, vias
- 168, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Aug 2018
- Updated
- 13 Oct 2024
Overview
RatTrapSensorPCB is an open-source printed circuit board by dqmcdonald, from the dqmcdonald/RatTrapSensorPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.1 × 62.8 mm with 15 parts on 30 nets, routed with 168 tracks and 6 vias.
Its parts include 6 connectors, 2 ICs, 2 switches, 1 resistor and 1 diode. It belongs with the sensors and measurement boards of this library.
README
README.mdPCB for "LoRat" Rat Trap sensor. LoRa enabled rat trap sensor.
See http://qproj.blogspot.com/2018/07/remotely-monitored-rat-traps-part-1.html
for details.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitors_SMD:C_0805_HandSoldering | 1uF, 1uF |
| 2 | CONN_2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P5, P6 |
| 2 | CONN_4 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P2, P3 |
| 1 | 220 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | ARDUPROMINI | DQM_kicad_new:ArduProMini | uP1 |
| 1 | CONN_2 | DQM_kicad_new:U.Fl_SMD | P4 |
| 1 | CONN_3 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | K1 |
| 1 | CONN_5 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | P1 |
| 1 | LED | Resistors_SMD:R_0805_HandSoldering | D1 |
| 1 | LoRaSx1276 | DQM_kicad_new:LoRaSx1276 | U1 |
| 1 | MCP1703A | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | SPST | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | SW1 |
Questions
How big is the RatTrapSensorPCB PCB?
It measures 34.1 × 62.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RatTrapSensorPCB use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RatTrapSensorPCB KiCad files?
From the dqmcdonald/RatTrapSensorPCB repository on GitHub, at the commit this page was made from: the board is RatTrapSensorPCB.kicad_pcb and its schematic RatTrapSensorPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RatTrapSensorPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
