2 layers34 × 57.2 mm
2 layers
Rgb ring
dotcypress/rgb-ring6RGB Ring Lights
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 29
- Pads
- 115
- Tracks, vias
- 398, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jan 2020
- Updated
- 11 Apr 2020
Overview
Rgb ring is an open-source printed circuit board by dotcypress, from the dotcypress/rgb-ring repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 30 parts on 29 nets, routed with 398 tracks and 21 vias.
It is built around the STM32G031J6M6 and WS2812B. Its parts include 12 diodes, 6 capacitors, 4 resistors, 3 connectors and 3 switches. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
2README
README.mdRGB Ring
Rust powered RGB light ring.
Resources
License
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R4, R5 |
| 1 | + | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | - | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | LDLN030 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | MODE | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | STM32G031J6M | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
Questions
What parts does the Rgb ring use?
30 parts, built around the STM32G031J6M6 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rgb ring KiCad files?
From the dotcypress/rgb-ring repository on GitHub, at the commit this page was made from: the board is pcb/rgb-ring.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rgb ring design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers31.8 × 25.4 mm
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
