
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards

Poprawiony projekt PCB sterownika silników w Kicad
DC driver v3 is an open-source printed circuit board by dominika0808, from the dominika0808/DC_driver_PCB_V3 repository on GitHub. It is a 2-layer board of 59.4 × 55.4 mm with 89 parts on 73 nets, routed with 551 tracks and 144 vias.
It is built around the AOD2544. Its parts include 33 capacitors, 20 resistors, 8 diodes, 8 transistors and 7 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C5, C7, C9, C11, C17, C18, C19, C20, C22, C29, C30 |
| 8 | 15MQ040NTR-SMC | Diode_SMD:D_SMA_Handsoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 33 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | AOD2544 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 5 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4, C6, C8, C16 |
| 4 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C31, C32, C33 |
| 4 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12 |
| 4 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C23, C24, C26, C27 |
| 4 | 2EDL05N06PFXUMA1 | 2EDL05N06PFXUMA1:SOIC127P600X175-8N | U1, U2, U3, U4 |
| 2 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C25, C28 |
| 2 | 18p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C14 |
| 2 | 22u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_HandSolder | C10, C12 |
| 2 | 270k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16, R19 |
| 2 | 50m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14 |
| 2 | 680k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R20 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J4 |
| 2 | INA199A1DCKR | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U6, U7 |
| 1 | 390k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C21 |
| 1 | 820k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | STM32F303CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | Screw_Terminal_01x02 | DG300-5.0-02P-13-00AH:DG3005002P1300AH | J6 |
| 1 | Screw_Terminal_01x02 | DG381-3.5-02P-13-00AH:DG3813502P1300AH | J5 |
The 85 most common of 89 parts.

josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards







tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
It measures 59.4 × 55.4 mm and has 2 copper layers, 1.6 mm thick.
89 parts, built around the AOD2544. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dominika0808/DC_driver_PCB_V3 repository on GitHub, at the commit this page was made from: the board is DC_driver_v3.kicad_pcb and its schematic DC_driver_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dominika0808 before reusing the design.