2 layers160 × 99.7 mm
2 layers322.6 × 133.8 mm
Ni vstopa prost
domenipavec/hardware- Size
- 322.6 × 133.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 68
- Pads
- 198
- Tracks, vias
- 286, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Nov 2014
- Updated
- 8 Dec 2016
Overview
Ni vstopa prost is an open-source printed circuit board by domenipavec, from the domenipavec/hardware repository on GitHub. It is a 2-layer board of 322.6 × 133.8 mm with 99 parts on 68 nets, routed with 286 tracks and 0 vias.
README
README.mdhardware
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 99 | LED | LED-5MM | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +83 |
More from domenipavec/hardware
2- 2 layers29 × 33 mm
Similar boards
- 2 layers106.4 × 95 mm
- 2 layers100 × 110 mm
Kicad control board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
99 parts171 - 2 layers66.1 × 62.2 mm
Mimas
numato/samplecode
This repository contains sample code for different Numato Lab products
99 parts144 - 2 layers89.2 × 58.9 mm
8In-8Out LAN9252-only
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
99 parts93 - 2 layers151.1 × 93.4 mm
- 2 layers
ISA FPGA CPU
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
99 parts78 - 2 layers144.8 × 88.9 mm
- 2 layers38 × 65 mm
Spe sink
Scottapotamas/spe-marine-node
Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)
99 parts34MIT
Questions
How big is the Ni vstopa prost PCB?
It measures 322.6 × 133.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ni vstopa prost use?
99 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ni vstopa prost KiCad files?
From the domenipavec/hardware repository on GitHub, at the commit this page was made from: the board is ni-vstopa-prost/ni-vstopa-prost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ni vstopa prost design in my own project?
Its repository states no licence, so its author keeps all rights: ask domenipavec before reusing the design.