4 layers42 × 42 mm
4 layers91 × 62 mm
FrostByte IRCamera PCB
DomenicHampson/IR-Camera-Interface-PCB- Size
- 91 × 62 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 78
- Pads
- 306
- Tracks, vias
- 572, 107
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jan 2026
- Updated
- 6 Feb 2026
Overview
FrostByte IRCamera PCB is an open-source printed circuit board by DomenicHampson, from the DomenicHampson/IR-Camera-Interface-PCB repository on GitHub. It is a 4-layer board of 91 × 62 mm with 89 parts on 78 nets, routed with 572 tracks and 107 vias.
It is built around the ESP32-S3-WROOM-1-N8, TCA9517DGKR and USB6B1RL, with the PE-0603PFB121ST and SMAJ33A among its other parts. Its parts include 28 resistors, 21 capacitors, 6 diodes, 6 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
5
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TCA9517DGKR
VSSOP-8-0.65mm-40℃~+85℃ 1 2 2.7V~5.5V 900mV~5.5V Bidirectional Open-drain Power-Off Protection VSSOP-8-0.65mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
USB6B1RL
SOP-8-55℃~+125℃ 18V 25A@8/20us 2uA 450W@8/20us 5V 5pF 6V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOP-8 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
PE-0603PFB121ST
0603-40℃~+125℃ 1 120Ω@100MHz 2A 50mΩ ±25% 0603 Ferrite Beads ROHSPulse ElecFerrite Beads
SMAJ33A
SMA-65℃~+150℃ 1uA 33V 40.6V 400W@10/1000us 53.3V 7.5A@10/1000us TVS SMA ESD and Surge Protection (TVS/ESD) ROHSShandong Jingdao MicroelectronicsESD And Surge Protection (TVS/ESD)
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C8, C9, C10, C14, C15, C16, C17, C18, C20, C21 |
| 10 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | 2v8, 3v3, CLK, CS, MISO, MOSI, RX, SCL, SDA, TX |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R9, R17, R22, R23, R25, R28 |
| 5 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R12, R13, R15, R24 |
| 4 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R20, R21 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C19 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R27 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R19 |
| 2 | 8pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 15V | footprints:DIOM5226X240N | D5 |
| 1 | 1A Slow Blow | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 3.9uH | footprints:IND_VLS6045EX-6R8M | L1 |
| 1 | 32.768kHz | footprints:XTAL_FC-135R_32.7680KA-AG0 | Y1 |
| 1 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 3404.2413.11 | footprints:Small_SMD_Fuse_Holder | F1 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | AP63203WU-7 | footprints:SOT-23-THIN-6_DDC_TEX | U1 |
| 1 | B240A-13-F | footprints:DIOM5226X230N | D6 |
| 1 | Conn_01x02_Socket | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x04_Socket | footprints:CONN4_BM04B-SRSS_JST | J3 |
| 1 | Conn_02x10 | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J4 |
| 1 | DNP | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | LED_Blue | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LED_Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LED_Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LOGO | footprints:rinkstat_logo | G*** |
| 1 | PE-0603PFB121ST | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1 |
| 1 | Power_Input | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | SI3127DV-T1-GE3 | footprints:TSOP-6L_VIS | Q1 |
| 1 | SMAJ33A | Diode_SMD:D_SMA | D1 |
| 1 | SN74AXC4T245PWR | footprints:SOP65P640X120-16N | U3 |
| 1 | TCA9517DGKR | footprints:SOP65P490X110-8N | U4 |
| 1 | UART | footprints:CONN4_BM04B-SRSS_JST | J5 |
| 1 | USB4120-03-C_REVA6 | footprints:GCT_USB4120-03-C_REVA6 | J6 |
| 1 | USB6B1RL | footprints:SOIC127P600X175-8N | U5 |
Questions
How big is the FrostByte IRCamera PCB PCB?
It measures 91 × 62 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FrostByte IRCamera PCB use?
89 parts, built around the ESP32-S3-WROOM-1-N8, TCA9517DGKR, USB6B1RL and PE-0603PFB121ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FrostByte IRCamera PCB KiCad files?
From the DomenicHampson/IR-Camera-Interface-PCB repository on GitHub, at the commit this page was made from: the board is FrostByte_IRCamera_PCB.kicad_pcb and its schematic FrostByte_IRCamera_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FrostByte IRCamera PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask DomenicHampson before reusing the design.
Similar boards
- 8 layers180.6 × 148.5 mm
AMC FMC Carrier PcbDoc
BerkeleyLab/Marble-Mini
"Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE
931 parts24 - 4 layers68.6 × 18 mm
- 6 layers14 × 101.5 mm
Mainboard revD
Mmrliu-gooooood/smart-pen-codex
首次重建时先用kicad-cli sch export netlist --format kicadxml ...生成XML，再buildpcb。runchecks.sh固定使用可写/tmp XDG目录，不写只读home配置。没有原厂PDF或私有相机图片打包。
102 parts - 4 layers213.4 × 77.5 mm
Keyboard steamdeck
vincentBenet/keyboard_steamdeck
This project aim to create a minimalist custom keyboard using standard keycaps. The goal is to have no keys restriction compare to a 120% keyboard.
112 parts1 - 4 layers45.2 × 70.6 mm
- 4 layers48.9 × 52.1 mm
Waterloo rocketry canhw processor
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
80 parts1 - 4 layers102.2 × 83 mm
