
Dongle
dohn-joh/dongle-zmk
Components for a zmk dongle: a reversible pcb that features mounting holes and wiring for a reset button, and a 3D printed case.

Components for a zmk dongle: a reversible pcb that features mounting holes and wiring for a reset button, and a 3D printed case.
Dongle routed is an open-source printed circuit board by dohn-joh, from the dohn-joh/dongle-zmk repository on GitHub. It is a 2-layer board of 30 × 35 mm with 8 parts on 19 nets, routed with 37 tracks and 5 vias.
Components for a zmk dongle: a reversible pcb that features mounting holes and wiring for a reset button, and a 3D printed case. The pcb is reversible so that you have the option to mount a reset button to the left or right side of the usb port.

This small project was inspired by https://github.com/spe2/zmk_dongle_hardware. I used ergogen to generate the pcb and designed the case in fusion360.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | mounting_hole | H1, H2, H3, H4 | |
| 1 | mcu | promicro | MCU1 |
| 1 | reset_button | sw_reset_side | SW1 |
The 6 most common of 8 parts.

dohn-joh/dongle-zmk
Components for a zmk dongle: a reversible pcb that features mounting holes and wiring for a reset button, and a 3D printed case.


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 30 × 35 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dohn-joh/dongle-zmk repository on GitHub, at the commit this page was made from: the board is ergogen/output/pcbs/dongle_routed.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dohn-joh before reusing the design.