2 layers255.1 × 95.5 mm
2 layers255.1 × 95.5 mm
Blasphemy render
dohn-joh/blasphemy4- Size
- 255.1 × 95.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 59
- Pads
- 364
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jan 2025
- Updated
- 14 Feb 2025
Overview
Blasphemy render is an open-source printed circuit board by dohn-joh, from the dohn-joh/blasphemy repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 255.1 × 95.5 mm with 82 parts on 59 nets.
It is built around the SKHLLCA010. Its parts include 38 switches and 36 diodes.
Main components
1Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 | |
| 8 | 1:switch_choc_v1_v2_blp_1u_top | S1, S2, S3, S4, S6, S7, S8, S9 | |
| 8 | 1:switch_choc_v1_v2_blp_1u_bottom | S21, S22, S23, S24, S26, S27, S28, S29 | |
| 6 | mounting_hole | H1, H2, H3, H4, H5, H6 | |
| 6 | 1:switch_choc_v1_v2_blp_1u_home | S12, S13, S14, S17, S18, S19 | |
| 2 | 1:switch_choc_v1_v2_blp_1u_convex_base | S32, S35 | |
| 2 | 1:switch_choc_v1_v2_blp_1u_convex_flex | S31, S34 | |
| 2 | 1:switch_choc_v1_v2_blp_1.25u_home | S11, S16 | |
| 1 | 1:conn_molex_pico_front | CONN1 | |
| 1 | 1:switch_choc_v1_v2_blp_1u_convex_ext | S33 | |
| 1 | 1:switch_choc_v1_v2_blp_1.75u_bottom_tilted_r | S30 | |
| 1 | 1:switch_choc_v1_v2_blp_1.75u_top_tilted_r | S10 | |
| 1 | 1:switch_choc_v1_v2_blp_1u_convex_ext_r | S36 | |
| 1 | 1:switch_choc_v1_v2_blp_1.5u_home_tilted | S15 | |
| 1 | 1:switch_choc_v1_v2_blp_1.75u_top_tilted | S5 | |
| 1 | 1:supermini_front | MCU1 | |
| 1 | 1:switch_choc_v1_v2_blp_1.5u_home_tilted_r | S20 | |
| 1 | 1:1208YD | SW1 | |
| 1 | 1:switch_choc_v1_v2_blp_1.75u_bottom_tilted | S25 | |
| 1 | SKHLLCA010 | 1:SKHLLCA010 | S37 |
More from dohn-joh/blasphemy
2- 2 layers272.4 × 89.9 mm
Similar boards
- 2 layers252.6 × 123.5 mm
- 2 layers130.3 × 105.3 mm
- 2 layers68 × 55.4 mm
- 2 layers271.8 × 78.7 mm
PCPI AppliCard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
82 parts446 - 2 layers57.2 × 60.3 mm
- 2 layers35.6 × 33 mm
Axp209 breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
82 parts253GPL-3.0 - 2 layers65 × 40 mm
Mdb slave esp32s3-sim7080g
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
82 parts190MIT - 2 layers83.5 × 66 mm
Open ed Rev.B
krikzz/open-ed
Open-ED is a very simple and cheap open source Genesis/Megadrive cartridge. The cartridge does not have its own processor or FPGA, it is built in the old school style using only memory and discrete logic.
82 parts169MIT
Questions
How big is the Blasphemy render PCB?
It measures 255.1 × 95.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Blasphemy render use?
82 parts, built around the SKHLLCA010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blasphemy render KiCad files?
From the dohn-joh/blasphemy repository on GitHub, at the commit this page was made from: the board is ergogen/output/pcbs/Blasphemy_render.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blasphemy render design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).