
Split Keyboard - Right
dntpannik/DuplicateSplitKeyboard
All information regarding the design of my duplicate split keyboard

All information regarding the design of my duplicate split keyboard
Keyboard - Left is an open-source printed circuit board by dntpannik, from the dntpannik/DuplicateSplitKeyboard repository on GitHub. It is a 2-layer board of 251.7 × 128.3 mm with 129 parts on 89 nets, routed with 581 tracks and 8 vias.
Its parts include 2 resistors, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
"# DuplicateSplitKeyboard"

| Qty | Value | Footprint | References |
|---|---|---|---|
| 62 | D | combodiode:ComboDiode | D_A1, D_A2, D_A3, D_A4, D_A5, D_A7, D_A8, D_A9, D_A10, D_A11, D_A12, D_B1, D_B2, D_B10, D_B11, D_B12 +46 |
| 51 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW_A1, SW_A2, SW_A3, SW_A4, SW_A5, SW_A7, SW_A8, SW_A9, SW_A10, SW_A11, SW_A12, SW_B1, SW_B2, SW_B10, SW_B11, SW_B12 +35 |
| 4 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW_F5, SW_F6, SW_F7, SW_F8 |
| 2 | 4.7k | combodiode:ComboResistor | R1, R2 |
| 2 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_Vertical_PCB | SW_C4, SW_E4 |
| 1 | AudioJack4 | Keebio-Parts:TRRS-PJ-320A | J1 |
| 1 | ProMicroEliteC | Keebio-Parts:Elite-C | U1 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | SW_E5 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | SW_D5 |
| 1 | SW_PUSH | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW_R1 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW_C5 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | SW_F1 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_2.75u_PCB | SW_F10 |

dntpannik/DuplicateSplitKeyboard
All information regarding the design of my duplicate split keyboard





jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

BathroomEpiphanies/KiCAD-Keyboard-Tutorial
Tutorial on making keyboard PCB layouts in KiCAD


It measures 251.7 × 128.3 mm and has 2 copper layers, 1.6 mm thick.
129 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dntpannik/DuplicateSplitKeyboard repository on GitHub, at the commit this page was made from: the board is PCB Design/Left/Keyboard - Left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dntpannik before reusing the design.