4 layers72.5 × 87.3 mm
Mouse V1
great-houk/mouse-project
Contains all the relevant folders for the entire custom mouse project
138 parts158MIT
2 layers15.2 × 19.1 mm
Samd11 breakout
dnbdmr/samd11_simpleBreakout board for SAMD11C14A
- Size
- 15.2 × 19.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 15
- Pads
- 54
- Tracks, vias
- 124, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Jun 2020
- Updated
- 13 Nov 2020
Overview
Samd11 breakout is an open-source printed circuit board by dnbdmr, from the dnbdmr/samd11_simple repository on GitHub, published under the MIT licence. It is a 2-layer board of 15.2 × 19.1 mm with 9 parts on 15 nets, routed with 124 tracks and 12 vias.
It is built around the ATSAMD11C14A-SSN. Its parts include 3 capacitors, 3 connectors, 2 ICs and 1 resistor. It belongs with the interfaces and adapters and microcontroller boards boards and the SAM D and SAM boards of this library.
Main components
1README
Readme.mdSimple breakout board for a soic-16 SAMD11C14A
- Micro USB
- all other pins broken out
- .5" wide. not too much space on breadboard.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ATSAMD11C14A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
Questions
How big is the Samd11 breakout PCB?
It measures 15.2 × 19.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Samd11 breakout use?
9 parts, built around the ATSAMD11C14A-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Samd11 breakout KiCad files?
From the dnbdmr/samd11_simple repository on GitHub, at the commit this page was made from: the board is samd11_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Samd11 breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers39.1 × 50.1 mm
Case smd challenge
CASE-Association/smd-challenge
Our CASE branded SMD Challenge. Do you have what it takes to complete it?
31 parts1 - 2 layers36.6 × 39 mm
- 2 layers54.3 × 35.2 mm
Urumbu Stepper TMC2208
SeanP2001/Urumbu_USB_Stepper_Motor
A modular approach to prototyping machines that move in the FabLAB
16 parts1MIT - 2 layers83.5 × 66 mm
- 2 layers57.4 × 48.5 mm
Starter d11 rev2
Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.
52 partsMIT - 2 layers32 × 26 mm
- 2 layers38.1 × 48.2 mm
