2 layers178.3 × 100.1 mm
2 layers36.8 × 69.2 mm
Motor controller
dmiracle/mechatronics- Size
- 36.8 × 69.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 71
- Tracks, vias
- 39, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Sep 2020
- Updated
- 27 Sep 2020
Overview
Motor controller is an open-source printed circuit board by dmiracle, from the dmiracle/mechatronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 36.8 × 69.2 mm with 13 parts on 11 nets, routed with 39 tracks and 3 vias.
It is built around the ZXBM5210-S. Its parts include 2 capacitors, 2 ICs, 2 connectors and 1 resistor. It belongs with the robots and motor control boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | Battery_Cell | motor-controller:M65P25-1011 | BT1 |
| 1 | CONTROLLER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | MOTOR CONNECTOR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | MT3608-BB | motor-controller:MT3608-BB | U1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ZXBM5210-S | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
The 8 most common of 13 parts.
Questions
How big is the Motor controller PCB?
It measures 36.8 × 69.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor controller use?
13 parts, built around the ZXBM5210-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor controller KiCad files?
From the dmiracle/mechatronics repository on GitHub, at the commit this page was made from: the board is pcb/motor-controller/motor-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers83 × 71 mm
- 4 layers112 × 52 mm
Beerator
Artpel1805/Beerator
Le but du projet est de réaliser intégralement un robot capable de se déplacer, de chercher et d’attraper une canette (de bière ? 😶), relever sa couleur, puis de la déposer dans la zone de couleur correspondante.
56 parts2 - 2 layers87.6 × 83.8 mm
ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 4 layers110 × 50 mm
Projet robot ESE
Groupe-Projet-ESE/BeerRobot
Chelsea COMLAN - Alix HAVRET - Loïcia KOEHL - Quentin SIMON
68 parts - 4 layers113.1 × 57 mm
- 4 layers90 × 70 mm
Kyttiludzinator
Lazorme/Ludz-le-chat
The Lidar and motor drivers are in drvLIDAR and drvMotor, respectively.
116 parts - 4 layers112 × 52 mm
