2 layers252.9 × 77.6 mm
2 layers218.6 × 65 mm
Interface full
dmazzer/hass-interface1Hardware interface for Home Assistant
- Size
- 218.6 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 101
- Pads
- 231
- Tracks, vias
- 522, 175
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Feb 2020
- Updated
- 30 Jul 2020
Overview
Interface full is an open-source printed circuit board by dmazzer, from the dmazzer/hass-interface repository on GitHub. It is a 2-layer board of 218.6 × 65 mm with 58 parts on 101 nets, routed with 522 tracks and 175 vias.
Its parts include 25 resistors, 20 connectors, 2 capacitors and 1 diode. It belongs with the interfaces and adapters boards of this library.
README
README.mdhass-interface
Hardware interface for Home Assistant
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R5, R11, R12, R13, R14, R20, R21, R22, R23 |
| 12 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7, R8, R9, R15, R16, R17, R18, R24, R25, R26, R27 |
| 4 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11, J12, J15, J18 |
| 3 | Arduino | Module:Arduino_Nano | A1, A2, A3 |
| 3 | From Wall Switch | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2, J3, J4 |
| 3 | RX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J13, J16, J19 |
| 3 | TX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14, J17, J20 |
| 3 | To Relay | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J5, J6, J7 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 5V DC IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J9 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | MountingHole_3.2mm_M3_ISO14580_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | Raspberry PI |
| 1 | RASPBERRY PI | interface-full:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | RPI_RX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | RPI_TX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
The 52 most common of 58 parts.
Questions
How big is the Interface full PCB?
It measures 218.6 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Interface full use?
58 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Interface full KiCad files?
From the dmazzer/hass-interface repository on GitHub, at the commit this page was made from: the board is board/interface-full.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Interface full design in my own project?
Its repository states no licence, so its author keeps all rights: ask dmazzer before reusing the design.
Similar boards
- 2 layers50 × 50 mm
- 2 layers97.3 × 71 mm
ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm
- 2 layers148 × 81 mm
Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT - 2 layers53.3 × 36.3 mm
- 2 layers70 × 30.3 mm
Pico 2HP Audio
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
58 parts84 - 2 layers35.7 × 34.2 mm
Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
58 parts81MIT