2 layers35.1 × 15.9 mm
Dumbo RC CH3 Momentary Button
dmadison/RC-Forza-Controller
Modified RC controller to play Forza Horizon 4.
10 parts9GPL-3.0
2 layers37 × 17.8 mm
Dumbo RC CH56 Buttons
dmadison/RC-Forza-Controller9Modified RC controller to play Forza Horizon 4.
- Size
- 37 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 4
- Pads
- 22
- Tracks, vias
- 32, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Aug 2020
- Updated
- 10 Nov 2020
Overview
Dumbo RC CH56 Buttons is an open-source printed circuit board by dmadison, from the dmadison/RC-Forza-Controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 37 × 17.8 mm with 12 parts on 4 nets, routed with 32 tracks and 0 vias.
Its parts include 2 resistors, 2 switches and 1 connector. It belongs with the interfaces and adapters boards of this library.
README
README.mdRC Controller for Forza
This project converts a DUMBORC x4 remote control for an RC car into a controller for Forza Horizon 4. A USB-capable microcontroller reads the receiver's PWM pulses and translates the signals into Xbox controller (XInput) inputs for the game.
For more information, check out the article on PartsNotIncluded.com.
Dependencies
The microcontroller code has several dependencies:
I've linked to the specific releases that work with this code. Note that other versions may not be compatible.
This project was compiled using version 1.8.12 of the Arduino IDE. Microcontrollers other than the ATmega32U4 may be compatible but have not been tested.
License
This project is licensed under the terms of the GNU General Public License, either version 3 of the License, or (at your option) any later version.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | AlignmentHole | DumboRC_Daughterboards:AlignmentHole_1.25mm | H4, H5, H6 |
| 3 | MountingHole | DumboRC_Daughterboards:MountingHole_2.25mm | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | LOGO | DumboRC_Daughterboards:DumboRC_Ch56_PNI-Logo | G*** |
More from dmadison/RC-Forza-Controller
1Similar boards
- 2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Dumbo RC CH56 Buttons PCB?
It measures 37 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dumbo RC CH56 Buttons use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dumbo RC CH56 Buttons KiCad files?
From the dmadison/RC-Forza-Controller repository on GitHub, at the commit this page was made from: the board is pcbs/CH5-6 Momentary/Dumbo RC CH56 Buttons.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dumbo RC CH56 Buttons design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).