2 layers233.6 × 56.6 mm
Pods panel
ToyotaInfoTech/RAMN
RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.
191 parts285
2 layers258.2 × 91.6 mm
Harite
dlip/harite68Harite 5-way Switch Keyboard
- Size
- 258.2 × 91.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 124
- Pads
- 384
- Tracks, vias
- 772, 78
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20240108)
- Created
- 25 May 2024
- Updated
- 11 Jan 2025
Overview
Harite is an open-source printed circuit board by dlip, from the dlip/harite repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 258.2 × 91.6 mm with 78 parts on 124 nets, routed with 772 tracks and 78 vias.
It is built around the SKRHADE010. Its parts include 50 diodes, 10 switches, 2 ICs and 2 connectors. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdHarite 5-way Switch Keyboard
Harite v2 now released! https://github.com/dlip/harite-v2
- 5-way switches - SKRHADE010 rated at 1,000,000 cycles for each direction
- RP2040-Zero controller
- Split using USB-C to connect the halves
- Dual Cirque 40mm trackpads (optional - you can put a Ploopy or other small trackball in place instead)
- QMK Firmware
- Custom PCB and case
- Hot-swapable joystick caps
- The name comes from the Sumo Slap attack in Japanese
- See a video demonstration
- If you would like to make your own, checkout the detailed build guide
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | D | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +34 |
| 10 | Mounting_Hole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 10 | SKRHADE010 | footprints:SKRHADE | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10 |
| 2 | Cirque Connector | footprints:Cirque-connector | J1, J2 |
| 2 | HRO-TYPE-C-31-M-12 | footprints:HRO-TYPE-C-31-M-12 | USB1, USB2 |
| 2 | RP2040_Zero | ScottoKeebs_MCU:RP2040_Zero | U1, U2 |
| 1 | LOGO | footprints:logo-right | G*** |
| 1 | LOGO | footprints:logo-left | G*** |
Questions
How big is the Harite PCB?
It measures 258.2 × 91.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Harite use?
78 parts, built around the SKRHADE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Harite KiCad files?
From the dlip/harite repository on GitHub, at the commit this page was made from: the board is harite.kicad_pcb and its schematic harite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Harite design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers126 × 47.8 mm
- 2 layers16.5 × 18.5 mm
Skrhade singlepcb
jonboh/skrhade_singlepcb
These switches can be acquired in Mouser and probably other electronic component stores.
12 partsGPL-3.0 - 2 layers57 × 75 mm
- 2 layers68.5 × 34.5 mm
TERES PCB5-KEYBOARD Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
78 parts578Apache-2.0 - 2 layers66.4 × 48.1 mm
- 2 layers38.1 × 19 mm
- 2 layers100 × 50 mm
