
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A PCB for nRF Promicro and Ebyte E28 2.4GHz modules
Skinny E28 is an open-source printed circuit board by dkmr27, from the dkmr27/Skinny_E28 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 62.5 × 20 mm with 11 parts on 25 nets, routed with 75 tracks and 35 vias.
Its parts include 4 connectors, 3 resistors, 2 capacitors, 1 IC and 1 switch.
A PCB for nRF52840 promicro and Ebyte E28-2G4MxxS 2.4GHz modules
This board is 20mm wide x 62.5mm long, designed to fit inside 25mm electrical conduit.
As with a lot of my boards, the extra components are optional. Reset button and 2x 1M ohm 1206 (R1/R2) resistors recommended at minimum. A hardware low voltage reset IC was included in the design but not tested.
Compatible modules:
The production folder contains a .zip file suitable for PCB production (JLCPCB etc.)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J1, J2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | Batt | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J4 |
| 1 | E28-2G4MxxSX | Ebyte E28 2G420SX:PE28(2G4M20SX) | J3 |
| 1 | MCP100T-315I/TT | Package_TO_SOT_SMD:SOT-23_Handsoldering | U1 |
| 1 | RST | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 62.5 × 20 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dkmr27/Skinny_E28 repository on GitHub, at the commit this page was made from: the board is Skinny_E28.kicad_pcb and its schematic Skinny_E28.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).