
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Designing a PCB based on chapter 2 in the Arduino projects book: Spaceship Interface
2 spaceship interface shield is an open-source printed circuit board by djsherm, from the djsherm/2_spaceship_interface_arduino_shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 16 parts on 31 nets, routed with 40 tracks and 0 vias.
Its parts include 4 resistors, 4 connectors, 3 diodes and 1 switch. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 220Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 1 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | SW_Push | myLibrary:TS02 push button | SW1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the djsherm/2_spaceship_interface_arduino_shield repository on GitHub, at the commit this page was made from: the board is 2_spaceship_interface_shield.kicad_pcb and its schematic 2_spaceship_interface_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask djsherm before reusing the design.