2 layers60 × 39 mm
2 layers61 × 48 mm
KiCad1
Djoser-cell/PCB-design- Size
- 61 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 45
- Pads
- 118
- Tracks, vias
- 143, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2026
- Updated
- 20 Apr 2026
Overview
KiCad1 is an open-source printed circuit board by Djoser-cell, from the Djoser-cell/PCB-design repository on GitHub. It is a 2-layer board of 61 × 48 mm with 31 parts on 45 nets, routed with 143 tracks and 12 vias.
It is built around the ATMEGA328P-PU, LT1012S8 and LT1492CN8. Its parts include 13 capacitors, 6 resistors, 4 ICs, 3 connectors and 2 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LT1012S8
SOIC8Picoamp Input Current, Microvolt Offset, Low Noise Operational AmplifierAnalog DevicesUncategorised
LT1492CN8
PDIP-8PDIP-8 Precision Op Amps ROHSAnalog DevicesPrecision Op Amps
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C301, C302, C303, C304 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C403, C404 |
| 2 | 10k0 | Resistor_SMD:R_0805_2012Metric | R301, R302 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C202, C203 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_8x5.4 | C204, C205 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R202 |
| 2 | 22uH | Inductor_SMD:L_1210_3225Metric | L201, L202 |
| 2 | PT10000 | Resistor_SMD:R_0805_2012Metric | TH301, TH302 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J101, J102 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R303 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C401 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C402 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_8x5.4 | C201 |
| 1 | 34k8 | Resistor_SMD:R_0805_2012Metric | R304 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U401 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J401 |
| 1 | LT1012 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U302 |
| 1 | LT1492 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U301 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT201 |
| 1 | TC7662Bx0A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U201 |
Similar boards
- 6 layers54 × 29 mm
- 4 layers74 × 28 mm
- 2 layers149.9 × 99.1 mm
- 2 layers60 × 95 mm
- 2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269 - 2 layers76.3 × 122.8 mm
Discipad pcb
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
63 parts221GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171
Questions
How big is the KiCad1 PCB?
It measures 61 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCad1 use?
31 parts, built around the ATMEGA328P-PU, LT1012S8 and LT1492CN8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad1 KiCad files?
From the Djoser-cell/PCB-design repository on GitHub, at the commit this page was made from: the board is Temperature_sensor/KiCad1.kicad_pcb and its schematic Temperature_sensor/KiCad1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Djoser-cell before reusing the design.