2 layers133.6 × 93 mm
2 layers435.8 × 140.5 mm
Keyboard
DJ-Laser/split-orthoWack keyboard just for fun!
- Size
- 435.8 × 140.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 158
- Pads
- 874
- Tracks, vias
- 270, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Feb 2025
- Updated
- 26 Feb 2025
Overview
Keyboard is an open-source printed circuit board by DJ-Laser, from the DJ-Laser/split-ortho repository on GitHub, published under the MIT licence. It is a 2-layer board of 435.8 × 140.5 mm with 160 parts on 158 nets, routed with 270 tracks and 0 vias.
Its parts include 78 diodes and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 78 | Diode | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +62 |
| 61 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.00u | S_-1, S_,1, S_.1, S_'1, S_/1, S_+1, S_0, S_1, S_2, S_3, S_4, S_5, S_6, S_7, S_8, S_9 +45 |
| 7 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.50u | S_\1, S_`1, S_BS1, S_CAPS1, S_LCTRL1, S_LSHIFT1, S_TAB1 |
| 5 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.25u | S_LALT1, S_LMOD1, S_RALT1, S_RCTRL1, S_RMOD1 |
| 3 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.00u | S_ENTER1, S_ESC1, S_RSHIFT1 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.50u | S_LSPC1, S_RSPC1 |
| 2 | Raspberry_Pi_Pico | ScottoKeebs_MCU:Raspberry_Pi_Pico | U1, U2 |
| 2 | TRRS | ScottoKeebs_Components:TRRS_PJ-320A | U3, U4 |
Questions
How big is the Keyboard PCB?
It measures 435.8 × 140.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
160 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the DJ-Laser/split-ortho repository on GitHub, at the commit this page was made from: the board is pcb/keyboard.kicad_pcb and its schematic pcb/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers78.7 × 32.4 mm
Flipper pb
ADolbyB/flipper-zero-files
A Collection Of Files From Various Sources Specifically For The Flipper Zero Device (In Progress)
160 parts265 - 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers321.8 × 129.3 mm
Pico keyboard v1
zli117/Pico-Keyboard
Hardware design for a mechanical keyboard based on RP2040
160 parts104CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers285 × 94.5 mm
Rmk ble keyboard
HaoboGu/rmk-ble-keyboard
A fully open source BLE/USB dual-mode GH60 keyboard powered by rmk
160 parts42GPL-3.0 - 2 layers50 × 52 mm
- 2 layers214.6 × 70.5 mm
