Skip to the content
2 layers33 × 56 mmPDS Diagnostics, the printed circuit board in 3D

Design files for a remake of the PDS Programmers Development System

Size
33 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
33
Pads
104
Tracks, vias
261, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 May 2026
Updated
16 Aug 2026

Overview

PDS Diagnostics is an open-source printed circuit board by diyelectromusic, from the diyelectromusic/PDS_Remake repository on GitHub, published under the MIT licence. It is a 2-layer board of 33 × 56 mm with 23 parts on 33 nets, routed with 261 tracks and 0 vias.

Its parts include 16 diodes and 5 connectors. It belongs with the interfaces and adapters boards of this library.

README

README.md

PDS Remake

Design files for a remake of the PDS Programmers Development System originally developed by Andy Glaister.

References:

Blog series describing the remake: https://emalliab.wordpress.com/2026/05/04/pds-the-programmers-development-system/

The remake is happening in collaboration with the Retro Collective who reached out to Andy directly. His response:

"You absolutely have my permission to reproduce the boards, the designs and the software. I will see if I can dig up stuff to help. It would be good to see all the code again."

We're going to try to collate as much information as we can in this repository.

State of the Information in this Repository

ItemStatusNotesCode
ISA PC CardTested and WorkingDetails of the testing and use in part 5 and part 6Tested with PDSZ80 DOS software
ZX Spectrum TargetTested and WorkingDetails also in part 5 and part 6Tested with PDS ZX Spectrum monitor
Amstrad CPC TargetTested and Probably WorkingHas been plugged in and communicates with PC card, details in part 8Tested with PDS Amstrad monitor
Diagnostic BreakoutTested and WorkingDetails in part 7Used between a ZX Spectrum target and PC ISA card

Regardless of the above, there is no expected fitness for purpose and it is strongly recommended that this information or these files NOT be used with any precious modern or retro equipment.

Only use with equipment you would be happy to lose should the worst happen. Proceed at your own risk.

Key Documentation

A basic PDS system comprises:

  • A PC ISA card.
  • A target connection interface, e.g. for ZX Spectrum or Amstrad CPC.
  • A bespoke 16-way ribbon link cable with 2x8 IDC connectors details here
  • An ISA DOS PC running the PDSZ80 assembler.
  • A target machine (ZX Spectrum or Amstrad CPC) running appropriate monitor code.

For more details, refer to the blog post series and the individual areas of this repository.

Background (from CPC Wiki)

PDS is an acronym for "Programmers Development System" and is a development system made by Andy Glaister. The system comprised an "Apricot PC" (an early PC), assembler, debugger, editor, profile, graphics tool and hardware to connect to a target computer. A company called "Programmers Development Systems Ltd" or "PD Systems" sold it.

The system made it easy to develop for computers like the Amstrad CPC, C64, MSX, and ZX Spectrum. The code was written on the PC and transferred through the hardware interface to the target computer.

The target computer ran a program which waited for PDS to send it instructions.

Rationale

The original system is quite hard to get hold of these days, and whilst a remake was created (the trastero.speccy.org link above) at some point in the past, design information and files suitable for use with modern PCB manufacturing seem not to exist.

This is a re-documenting and remaking of some of the boards, refering to all the existing information and a reimaginging of some of the hardware components in KiCAD.

License

The original Intellectual Property was owned by Programmers Development Systems Ltd, founded by Andy Glaister. This new design has been put together from information obtained from the Internet, from original users of the system, and some from Andy himself, aiming to support retro enthusiasts who are not able to obtain original working hardware.

As mentioned above, we reached out to Andy about reproducing the system and he has given us the go ahead to document and publish what we're finding, consiquently everything here is publsihed under a MIT license unless stated otherwise.

Retaining the spirit of openess and generocity shown by Andy, at this time we ask that this information is not used to create PDS hardware to be sold for commercial gain.

Copyright of directly reproduced elements remains with the original developers. Other elements are copyright (C) Kevin (diyelectromusic).

There is no permission, direct or implied, for the contents of this repository to be used for the training of AI systems.

Kevin

Parts

23
QtyValueFootprintReferences
16LEDLED_THT:LED_Rectangular_W3.0mm_H2.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
22K+Resistor_THT:R_Array_SIP9RN1, RN2
1BreakoutConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ2
1GNDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1PC SideConnector_IDC:IDC-Header_2x08_P2.54mm_VerticalJ1
1PDS GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Target SideConnector_IDC:IDC-Header_2x08_P2.54mm_VerticalJ3

More from diyelectromusic/PDS_Remake

3
  • 2 layers73.7 × 70 mmPDS Amstrad, the printed circuit board in 3D

    PDS Amstrad

    diyelectromusic/PDS_Remake

    Design files for a remake of the PDS Programmers Development System

    21 parts2MIT
  • 2 layers100 × 99.6 mmPDS PCISA, the printed circuit board in 3D

    PDS PCISA

    diyelectromusic/PDS_Remake

    Design files for a remake of the PDS Programmers Development System

    15 parts2MIT
  • 2 layers73.7 × 70 mmPDS ZXSpectrum, the printed circuit board in 3D

    PDS ZXSpectrum

    diyelectromusic/PDS_Remake

    Design files for a remake of the PDS Programmers Development System

    15 parts2MIT

Similar boards

  • 2 layers65 × 56 mmPi servo hat, the printed circuit board in 3D

    Pi servo hat

    earthtojake/text-to-cad

    Design physical products with AI

    23 parts26kMIT
  • 2 layers14 × 100 mmYunomi, the printed circuit board in 3D

    Yunomi

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    23 parts3kApache-2.0
  • 2 layers50.8 × 52.2 mmFuhhni, the printed circuit board in 3D

    Fuhhni

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    23 parts915
  • 2 layers138.8 × 89.8 mmKeyboard pcb, the printed circuit board in 3D

    Keyboard pcb

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    23 parts756GPL-3.0
  • 2 layers32.9 × 53.3 mmGoatgdo, the printed circuit board in 3D

    Goatgdo

    Kaldek/rat-ratgdo

    Open source schematics for ratgdo PCB

    23 parts511MIT
  • 2 layers35.5 × 50 mmTobo, the printed circuit board in 3D

    Tobo

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    23 parts463
  • 2 layers19 × 19 mmKeybit, the printed circuit board in 3D

    Keybit

    notaroomba/keybytes

    A truly modular keyboard

    23 parts444
  • 2 layers88.5 × 28 mmExpBreakout, the printed circuit board in 3D

    ExpBreakout

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    23 parts258

Questions

How big is the PDS Diagnostics PCB?

It measures 33 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PDS Diagnostics use?

23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PDS Diagnostics KiCad files?

From the diyelectromusic/PDS_Remake repository on GitHub, at the commit this page was made from: the board is Diagnosics/kicad/PDS_Diagnostics.kicad_pcb and its schematic AmtsradCPC/kicad/PDS_Amstrad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PDS Diagnostics design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).