Skip to the content
2 layers41.9 × 99.1 mmLSDA PCB, the printed circuit board in 3D

A control circuit based on light differentials

Size
41.9 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
25
Pads
90
Tracks, vias
93, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Feb 2025
Updated
19 Apr 2025

Overview

LSDA PCB is an open-source printed circuit board by DIY-Nabra, from the DIY-Nabra/dlopper repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 41.9 × 99.1 mm with 41 parts on 25 nets, routed with 93 tracks and 0 vias.

It is built around the LM324 and BC547. Its parts include 22 resistors, 4 capacitors, 3 diodes, 2 transistors and 1 IC.

Main components

2

README

README.md

Dlopper

This is the Dlopper, a control circuit.

It outputs gates and control voltage due to light differentials.

Download the PDF from here

dlopper_paper_circ

dlopper_paper_circ

Parts

41
QtyValueFootprintReferences
8100kdiy-nabra:r3R1, R2, R5, R8, R9, R10, R21, R24
610kdiy-nabra:r3R4, R7, R11, R18, R19, R20
4MountingHole_Pad_MPMountingHole:MountingHole_3.2mm_M3_ISO7380_PadH1, H2, H3, H4
210uFdiy-nabra:cel1C1, C3
21kdiy-nabra:r3R15, R17
21uFdiy-nabra:cpoly105C4, C5
222kdiy-nabra:r3R14, R16
268kdiy-nabra:r3R22, R23
2BC547diy-nabra:qnpnQ1, Q2
2LEDdiy-nabra:ledD1, D2
11N4001diy-nabra:power-1n4001D3
1B25kdiy-nabra:wnobRV1
1Batterydiy-nabra:wobeliskBT1
1CompBotdiy-nabra:wsqoutTP1
1CompTopdiy-nabra:wsqoutTP3
1LDR-BOTdiy-nabra:cadsulfide_smR3
1LDR-TOPdiy-nabra:cadsulfide_smR6
1LM324diy-nabra:dip14U1
1Outdiy-nabra:wsqoutTP2

More from DIY-Nabra/dlopper

1
  • 2 layersLSDA paper, the printed circuit board in 3D

    LSDA paper

    DIY-Nabra/dlopper

    A control circuit based on light differentials

    81 parts4BSD-2-Clause

Similar boards

  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layers110 × 100 mmLab Bench PSU, the printed circuit board in 3D

    Lab Bench PSU

    BojanSof/Lab-Bench-PSU

    Laboratory bench power supply with switching preregulator and LDO.

    84 parts1
  • 2 layers55 × 485 mmFg lampe, the printed circuit board in 3D

    Fg lampe

    devtal-de/fg_lampe

    181 parts1
  • 2 layers113.5 × 78.7 mmMains Control, the printed circuit board in 3D

    Mains Control

    Mounith-H/Mains-Cutoff-Circuit

    A hardware circuit designed to automatically disconnect mains power during overvoltage (>270V) or undervoltage (<170V) conditions to protect appliances.

    67 partsMIT
  • 2 layers100 × 100 mmLissajouz, the printed circuit board in 3D

    Lissajouz

    Windfisch/lissajouz

    Analog lissajouz figure generator. (i.e. two syncable pseudo sine oscillators)

    133 parts
  • 2 layers43.2 × 111.8 mmNoise, the printed circuit board in 3D

    Noise

    spielhuus/elektrophon

    Modular analog electro acoustic noise machine.

    46 parts32
  • 2 layers100 × 100 mmCmos rungler, the printed circuit board in 3D

    Cmos rungler

    masonandrewmann/modular-synth-pcbs

    these are some pcbs :~)

    69 parts1

Questions

How big is the LSDA PCB PCB?

It measures 41.9 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LSDA PCB use?

41 parts, built around the LM324 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LSDA PCB KiCad files?

From the DIY-Nabra/dlopper repository on GitHub, at the commit this page was made from: the board is LSDA_PCB/LSDA_PCB.kicad_pcb and its schematic LSDA_PCB/LSDA_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LSDA PCB design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).