Skip to the content
2 layers50.8 × 25.4 mmAQ SAO, the printed circuit board in 3D

Designs and code for add-ons built using the Hackaday Supercon SAO interface

Size
50.8 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
17
Pads
54
Tracks, vias
74, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
29 Sep 2024
Updated
3 Nov 2024

Overview

AQ SAO is an open-source printed circuit board by disquisitioner, from the disquisitioner/Supercon-SAO repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 25.4 mm with 15 parts on 17 nets, routed with 74 tracks and 0 vias.

It is built around the 74HC00D. Its parts include 3 resistors, 3 diodes, 3 connectors and 2 ICs. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

Supercon SAO Projects

Each year the Hackaday Supercon conference designs a unique badge that attendees can wear but also program. While every year's badge is very different, they all incorporate an add-on interface (called the "Supercon Add-On" or "SAO") that exposes power and digital communications in a standardized configuration.

I'm attending Supercon for the first time in 2024 and am keen to try my hand at badge programming and SAO development. This repo serves as a collection point for software and hardware designs in support of my SAO voyage of discovery. Everything is organized by year, as the badge, badge programming environment, and documentation changes every year.

Part of the challenge in developing an SAO add-on is that details of the badge are not released until about four weeks before the conference. It pays, therefore, to be as prepared as possible but also stay flexible so you can react and probably re-design once actual badge specifications are known.

My newbie attempt for 2024 is to build an add-on that monitors air quality around the badge wearer and uses a simple "stoplight" with red, yellow and green LEDs to translate current CO2 levels into subjective "good" (green), "warning" (yellow) and "alert!" (red) values. We'll see how that goes...

Parts

15
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
339Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3
274HC00Package_DIP:DIP-14_W7.62mmU1, U2
1Green LEDLED_THT:LED_Rectangular_W5.0mm_H2.0mmD1
1Red LEDLED_THT:LED_Rectangular_W5.0mm_H2.0mmD3
1SAO (on back)Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1SDA-SCLConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1VCC-GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Yellow LEDLED_THT:LED_Rectangular_W5.0mm_H2.0mmD2

More from disquisitioner/Supercon-SAO

1
  • 2 layers25.4 × 25.4 mmSAO Breakout, the printed circuit board in 3D

    SAO Breakout

    disquisitioner/Supercon-SAO

    Designs and code for add-ons built using the Hackaday Supercon SAO interface

    2 parts1MIT

Similar boards

  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers203.2 × 149.9 mm65C02 Computer, the printed circuit board in 3D

    65C02 Computer

    dbuchwald/6502

    DB6502: 65C02 based computer inspired by BE6502

    68 parts177MIT
  • 2 layers99.1 × 88.9 mm1002 EPROM EMU NG 2.2d, the printed circuit board in 3D

    1002 EPROM EMU NG 2.2d

    Kris-Sekula/EPROM-EMU-NG

    EPROM Emulator Project with Arduino

    49 parts161Apache-2.0
  • 4 layers120 × 98 mmExbus proto, the printed circuit board in 3D

    Exbus proto

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    871 parts150
  • 2 layers99.1 × 99.1 mmBE6502 SBC, the printed circuit board in 3D

    BE6502 SBC

    tebl/BE6502-Build-a-65c02-computer

    A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..

    61 parts129
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers70 × 85 mm1bit CPU, the printed circuit board in 3D

    1bit CPU

    naoto64/1bit-CPU

    1bit CPU using 74HC series logic IC.

    38 parts91MIT

Questions

How big is the AQ SAO PCB?

It measures 50.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AQ SAO use?

15 parts, built around the 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AQ SAO KiCad files?

From the disquisitioner/Supercon-SAO repository on GitHub, at the commit this page was made from: the board is 2024/KiCad Projects/AQ-SAO/AQ-SAO.kicad_pcb and its schematic 2024/KiCad Projects/AQ-SAO/AQ-SAO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AQ SAO design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).