Skip to the content
2 layers82.3 × 79 mmESP32Pet, the printed circuit board in 3D

Tamagotchi PCB Design and Firmware Project

Size
82.3 × 79 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
30
Pads
81
Tracks, vias
114, 11
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 May 2025
Updated
18 Sep 2026

Overview

ESP32Pet is an open-source printed circuit board by dishishshawn, from the dishishshawn/ESP32Pet repository on GitHub. It is a 2-layer board of 82.3 × 79 mm with 45 parts on 30 nets, routed with 114 tracks and 11 vias.

Its parts include 3 resistors, 3 ICs, 1 capacitor and 1 connector. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.

README

README.md

ESP32PET

An open-source Tamagotchi, built on an ESP32 with an ST7735 LCD and physical buttons. A digital pet resembling me responds to feeding, playing, and dressing up. Stats are persistent (saved to EEPROM)

Features

  • Deep sleep (Battery powered use)
  • Three-button UI (+ 1 for on and off)
  • Designed for portable use

Hardware Requirements

  • ESP32 w/ EEPROM storage (ESP32 DevKit V1)
  • Arduino framework (Platform IO)
  • TFT LCD (ST7735)
  • 3.7V LiPo battery + MCP1700 (3.3V LDO)
  • 4x momentary push buttons

Applications

  • KiCAD
  • Arduino IDE or PlatformIO

Additional Notes

Decided to use the full esp32 dev kit for easy testing of new firmware/features.

Images

image image

Schematic

Top level

Top-level schematic

ESP32

ESP32 schematic

Power

Power schematic

TFT LCD

TFT LCD schematic

Tamagotchi Case

OnShape

Demo

No demo currently

Sponsorship

image

PCBWay sponsors 3D Printing and PCB assembly costs on this project during the prototyping phase! If you are interested in their awesome fabrication services please check them out. They offer 3D prototyping, PCB design, and assembly, as well as CNC metal fabrication. Costs are reasonable and the quality is as good as it gets. Thank you, PCBWay, for sponsoring me!

License

MIT

Parts

45
QtyValueFootprintReferences
310kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R3, R4
36x6mm ButtonButton_Switch_THT:SW_PUSH_6mm_H5mmDOWN1, SELECT1, UP1
3FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3
110 uFCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC1
13.3V LDOPackage_TO_SOT_THT:TO-92_InlineU1
13.7V LIPO + CHARGINGConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1ESP32-DEVKIT-V1ESP32 Devkit:MODULE_ESP32_DEVKIT_V1U5
1TFT LCDST7735:TFT LCD 1.8inch 128x160 w_ SD Card SlotU2

The 14 most common of 45 parts.

Similar boards

  • 2 layers30 × 61.3 mmModuleV440, the printed circuit board in 3D

    ModuleV440

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    45 parts1.1k
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    45 parts517GPL-2.0
  • 2 layers49.8 × 88.9 mmLDG WING FOLD PLACARD, the printed circuit board in 3D

    LDG WING FOLD PLACARD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    45 parts431
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers40.2 × 19 mmOMGS3 Carrier R1, the printed circuit board in 3D

    OMGS3 Carrier R1

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    45 parts296
  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers99.1 × 81.9 mmRC6502 Terminal, the printed circuit board in 3D

    RC6502 Terminal

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    45 parts193GPL-3.0
  • 2 layers116.1 × 94.7 mmMiniDox, the printed circuit board in 3D

    MiniDox

    That-Canadian/MiniDox_PCB

    MiniDox Keyboard, PCB files

    45 parts169WTFPL

Questions

How big is the ESP32Pet PCB?

It measures 82.3 × 79 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32Pet use?

45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32Pet KiCad files?

From the dishishshawn/ESP32Pet repository on GitHub, at the commit this page was made from: the board is ESP32Pet PCB/ESP32Pet.kicad_pcb and its schematic ESP32Pet PCB/ESP32Pet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32Pet design in my own project?

Its repository states no licence, so its author keeps all rights: ask dishishshawn before reusing the design.