2 layers98 × 27 mm
2 layers20 × 16 mm
Hs probe adapter
Disasm/hs-probe-adapter5Adapter board for the HS Probe hardware probe.
- Size
- 20 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 13
- Pads
- 37
- Tracks, vias
- 90, 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Dec 2021
- Updated
- 31 Dec 2023
Overview
Hs probe adapter is an open-source printed circuit board by Disasm, from the Disasm/hs-probe-adapter repository on GitHub. It is a 2-layer board of 20 × 16 mm with 5 parts on 13 nets, routed with 90 tracks and 15 vias.
It belongs with the sensors and measurement and interfaces and adapters boards of this library.
README
README.mdhs-probe-adapter
Adapter board for the HS Probe hardware probe.
Provides the following connectors:
- J2: 10-pin ARM SWD connector (1.27mm pitch)
- J3: UART connector (2.54mm pitch)
- J4: SWD connector (2.54mm pitch)
- J5: BluePill connector (2.54mm pitch)
J1 is the HS Probe connector (STDC14).
Revision History
1.0: 2022-01-23
- First version.
- Errata:
- J2 (ARM SWD) connector pinout is incorrect. Do not use it.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ARM SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | BluePill | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J5 |
| 1 | STDC14 | Connector_PinSocket_1.27mm:PinSocket_2x07_P1.27mm_Vertical_SMD | J1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
Questions
How big is the Hs probe adapter PCB?
It measures 20 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hs probe adapter use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hs probe adapter KiCad files?
From the Disasm/hs-probe-adapter repository on GitHub, at the commit this page was made from: the board is hs-probe-adapter.kicad_pcb and its schematic hs-probe-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hs probe adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Disasm before reusing the design.
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT