2 layers25.4 × 35.6 mm
2 layers55.2 × 46 mm
RC Switch-2-Kanal
dirk-sth/RC-SwitchRC-Switch
- Size
- 55.2 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 22
- Pads
- 73
- Tracks, vias
- 111, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Dec 2023
- Updated
- 16 Feb 2024
Overview
RC Switch-2-Kanal is an open-source printed circuit board by dirk-sth, from the dirk-sth/RC-Switch repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.2 × 46 mm with 26 parts on 22 nets, routed with 111 tracks and 0 vias.
It is built around the ATTINY85-20PU and BC547. Its parts include 6 resistors, 5 diodes, 4 connectors, 2 capacitors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
RC-Switch-2-Kanal/README.mdRC-Switch 2 Kanal Version
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R6 |
| 2 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2 |
| 2 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R5 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92L_HandSolder | T1, T2 |
| 2 | FTR-F1C | Relay_THT:Relay_DPDT_Fujitsu_FTR-F1C | K1, K2 |
| 2 | LED | LED_THT:LED_D3.0mm | D4, D5 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J3, J4 |
| 1 | |||
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm | IC1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
The 23 most common of 26 parts.
Questions
How big is the RC Switch-2-Kanal PCB?
It measures 55.2 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RC Switch-2-Kanal use?
26 parts, built around the ATTINY85-20PU and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC Switch-2-Kanal KiCad files?
From the dirk-sth/RC-Switch repository on GitHub, at the commit this page was made from: the board is RC-Switch-2-Kanal/RC-Switch-2-Kanal.kicad_pcb and its schematic RC-Switch-2-Kanal/RC-Switch-2-Kanal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC Switch-2-Kanal design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers22.2 × 46.4 mm
C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112 - 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm
Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm
Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers
- 2 layers55.9 × 55.9 mm
- 2 layers71.1 × 40.6 mm
Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22