Skip to the content
2 layers100 × 30 mmShadowlesslight right fin, the printed circuit board in 3D

Shadowlesslight right fin

dinotiger01/shadowless-light1
Size
100 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
9
Pads
86
Tracks, vias
202, 24
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jul 2026
Updated
20 Sep 2026

Overview

Shadowlesslight right fin is an open-source printed circuit board by dinotiger01, from the dinotiger01/shadowless-light repository on GitHub. It is a 2-layer board of 100 × 30 mm with 31 parts on 9 nets, routed with 202 tracks and 24 vias.

README

README.md

shadowless-light

if you are a Stardance reviewer i messed up when doing the ship it has the wrong banner and video

indicator schemadicindicator schemadic


description

demo video: https://youtu.be/H-r51vnOVfs
this is a desk light designed to not cast a shadow to make working on fine details easier
it works by having a main light then there is octogon ring around it that has lights and will tilt in and out to make sure every spot has at least one light on it

regular lightshadowless ligh
indicator schemadicindicator schemadic

use cases

  • soldering
  • painting fine detail
  • just like any kinda of work tbh

features

  • btight
  • RGBW
  • UV
  • adjustable lights
  • blind yourself

assembly

i cover this in the yt video a lot better


3d print

settings:
plastic: pla
supports: trees
layer hight: 0.28mm
nozzle: 0.4mm
nozzle temp: 210°C
bed temp: 60°C
infill: 15%

numbername
1hook
1main
16supports
8light
8pivoit
8push
4servo
16pin
1cover

wall

attatch the stand to the wall the instructions are on the box

3d print assembly

  • remove suports
  • put the hook on stand
  • place the main thing on the hook
  • place all the 16 suports in the main thing and secure it with the pins
  • thread the pivots throught the suports and the lights to make an octogon
  • put the servos through the big holes in the main thing
  • then thread the push through the top of the light and the servo
  • then the goes on top of the main thing

pcbs

numbername
8left wing
8right wing
1main
1indicator
1motherboard

soldering

350 c recomended

  • solder the 1 left wing light
  • solder the 1 right wing light
  • use the pad on the side to hold them togeather
  • solder wires to the sides of the pcb
  • repeate x 8
  • main board
    • RGBW the uv
    • one of the lights needs some help
  • mother board
    • the v line is a cut power cable
  • indicator

arduino

you need to use adruino ide to upload the script to the arduino nano

servos :(

so i forgot about the servo when making the pcb so there isnt a convinent break out for it so you need to solder a wire to pin 7 directly then split the wire in to 4 then thats the data wire for the servos and the gnd and power come direcly from the power suply also i think my servos are too weak so they wernt able to actualy do anyyhing

assembling electronics

  • wings
    • zip tie just like every thing
    • then do that 8 times
  • main
    • you guesed it zip ties
  • plug in all the things
  • power supply
    • connect a 120v ac up to the main thing
    • connect one side to the switch on the front and the other side to one on the things on the 12v rectifer
    • this is another thing i forgot to add to the pcb connect the 12v output to the power wires on the mother board
    • now for the 5v if you have a buck dc to dc converter use that i didnt so i did this
    • connect a wall 5v rectifyer in parralel with the 120vac then plug that in to the the arduino with a usb to usbc
    • however we need to cut this wire then split it in to a bunch of things so that we can power the servos

documantation

  • schemadic
    • indicator this is used to show if it is on and what value you are adjusting
    • indicator schemadicindicator schemadic
    • right wing
    • indicator schemadic
    • indicator schemadic
    • left wing
    • indicator schemadic
    • indicator schemadic
    • motherboard
    • indicator schemadic
    • indicator schemadic
    • main
    • indicator schemadic
    • indicator schemadic
  • voltage stuff
    • lights are running at 12v
    • each light runs at 20mA there is 4 lights in eash light there are 101 lights so 404 individual light + the 20 uv lights all run at 20mA or 0.02A * 424 = 8.48A
    • the 12 has 10A to cover it all
  • lumins alot
    • red 4.8 lumens
    • green 10.7 lumens
    • blue 2.2 lumens
    • 10.7 lumens
    • 28.4 lumens per light X 101 = 248.4 lumens at max britness
  • it is suposed to sit about 600mm off your desk
  • its about 600mm in total witch ngl i think is too big i might make a smaler one in the futger

extra

  • i am like really bad ar soldering so like half the light dont work

Parts

31
QtyValueFootprintReferences
15R_1206_3216Metric_Pad1.30x1.75mm_HandSolderResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder470Ω-R1, 470Ω-R2, 470Ω-R4, 470Ω-R5, 470Ω-R6, 470Ω-R8, 470Ω-R9, 470Ω-R10, 470Ω-R12, 470Ω-R13, 470Ω-R14, 470Ω-R16, 470Ω-R17, 470Ω-R18, 470Ω-R20
5LED_CLW6A_RGBWimports:LED_CLW6A_RGBWDS1, DS2, DS3, DS4, DS5
5R_0805_2012Metric_Pad1.20x1.40mm_HandSolderResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder510Ω-R3, 510Ω-R7, 510Ω-R11, 510Ω-R15, 510Ω-R19
5TestPoint_Pad_2.0x2.0mmTestPoint:TestPoint_Pad_2.0x2.0mm-B, -G, -R, -W, VCC
1SolderWire-0.127sqmm_1x01_D0.48mm_OD1mmConnector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mmVCC

More from dinotiger01/shadowless-light

4

Similar boards

  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0
  • 2 layers103 × 55 mmTd neck-294, the printed circuit board in 3D

    Td neck-294

    tdaede/td-crt

    tubes

    31 parts373

Questions

How big is the Shadowlesslight right fin PCB?

It measures 100 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shadowlesslight right fin use?

31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shadowlesslight right fin KiCad files?

From the dinotiger01/shadowless-light repository on GitHub, at the commit this page was made from: the board is pcb/kicad/shadowless light fin right/shadowlesslight_right_fin.kicad_pcb and its schematic pcb/kicad/shadowless light indicator/shadowless lightindicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shadowlesslight right fin design in my own project?

Its repository states no licence, so its author keeps all rights: ask dinotiger01 before reusing the design.