
Speech
dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.
Adapter is an open-source printed circuit board by dimitrit, from the dimitrit/pal1gadgets repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 17 × 34 mm with 2 parts on 18 nets, routed with 51 tracks and 0 vias.
It belongs with the retro computing and games and interfaces and adapters boards of this library.
The PAL-1 RIOT Expansion Module adds two bidirectional 8-bit digital input/output ports and a programmable interval timer to the PAL-1 system by means of a MOS6532 RAM-I/O-Timer (RIOT) IC.1
This repository includes a number of `gadgets' that can be plugged in to the RIOT Expansion Module to provide specific functionality, including:
Refer to the relevant directories for details on each gadget.
Gadgets are plugged in to the PAL-1 RIOT Expansion Module using a RIOT adapter.
Code examples are provided for most gadgets. These code examples use vasm6502_oldstyle syntax2 and can be built using make.3
PAL-1 and the PAL-1 logo used with kind permission by Liu Ganning.
Ganning, Liu, ‘RIOT EXPANSION’, 2021 http://pal.aibs.ws/assets/RIOT_expansion_manual.pdf [accessed 26 January 2024]. ↩
Barthelmann, Volker and Wille, Frank, `vasm assembler system' (2024), http://sun.hasenbraten.de/vasm/daily/vasm.tar.gz [accessed 27 March 2024]. ↩
Free Software Foundation, `Make - GNU Project', <https://www.gnu.org/ software/make/> [accessed 27 March 2024]. ↩
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_Adapter_A | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Horizontal | J1 |
| 1 | Conn_Adapter_B | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Vertical | J2 |

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

dimitrit/pal1gadgets
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 17 × 34 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dimitrit/pal1gadgets repository on GitHub, at the commit this page was made from: the board is adapter/kicad/adapter.kicad_pcb and its schematic adapter/kicad/adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).