2 layers62.7 × 58.9 mm
Led neon lounge
Arthur-Sebastian/led-neon-lounge
An RGB LED neon project using 3d printed parts and custom AVR-based controller board with included software.
23 parts1LGPL-2.1
2 layers98.8 × 79 mm
Genv01 2
dimipapr/TalkyPumpThe legacy v1 firmware is preserved under archive/ as a behavioral reference.
- Size
- 98.8 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 52
- Pads
- 136
- Tracks, vias
- 269, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Sep 2022
- Updated
- 11 Jun 2026
Overview
Genv01 2 is an open-source printed circuit board by dimipapr, from the dimipapr/TalkyPump repository on GitHub. It is a 2-layer board of 98.8 × 79 mm with 38 parts on 52 nets, routed with 269 tracks and 11 vias.
It is built around the ATMEGA168PA-PU, SIM800C and IRM-20-5, with the H11L1, ALQ105 and BC337 among its other parts. Its parts include 8 resistors, 8 connectors, 4 diodes, 3 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA168PA-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
SIM800C
SMD,17.6x15.7mm3.4V~4.4V CMUX功能、噪声抑制功能、USSD功能 GPRS、GSM UART、GPIO、ADC、SIM card SMD,17.6x15.7mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G Modules
IRM-20-5
-- Power Module/Power Supply ROHSMWPower Module/Power Supply
H11L1
DIP-6-55℃~+100℃ 1 1.6mA 1Mbit/s 250mW 3V~15V 5kV DC DIP-6 Logic Output Optoisolators ROHSEverlight ElectronicsLogic Output Optoisolators
ALQ105
插件,20x10mm-40℃~+85℃ 100mΩ 10A 10mm 1A@30VDC、2A@250VAC、3A@125VAC、5A@30VDC、5A@250VAC、10A@125VAC 20mm 20ms 20ms 250V@AC 400mW 5V 62.5Ω AgNi One set of changeover: 1C (SPDT-changeover) Plugin,20x10mm Power Relays ROHSPanasonicPower Relays
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdTalkyPump
TalkyPump firmware project.
The legacy v1 firmware is preserved under archive/ as a behavioral reference.
Active same-hardware v2 development happens under firmware/.
Target hardware:
- ATmega168
- SIM800L
- existing relay control hardware
- existing relay state input
- existing alarm inputs
- existing mains/zero-cross input
- existing indication LED
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 30k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R7, R8, R9 |
| 3 | Screw_Terminal_01x02 | gen:Screw_terminal_1x2_5.08mm | J6, J7, J8 |
| 2 | 100n | gen:K104K10X7RF5UL2 | C1, C2 |
| 2 | 1N4001 | Diode_THT:D_A-405_P7.62mm_Horizontal | D3, D4 |
| 2 | 1N4005 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | Rb1, Rb2 |
| 2 | ALQ105 | gen:ALQ105 | K1, K2 |
| 2 | BC337 | Package_TO_SOT_THT:TO-92L_Wide | Q1, Q2 |
| 2 | Inputs | gen:Screw_terminal_1x3_5.08mm | J1, J2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 10u | gen:L_Radial_5mm_2mm | L1 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 68k1W | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | ATmega168PA-PU | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92L_Wide | Q3 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | H11L1 | Package_DIP:DIP-6_W7.62mm_Socket | U2 |
| 1 | IRM-20-5 | gen:IRM2024 | PS1 |
| 1 | P_OUT | gen:Screw_terminal_1x3_5.08mm | J3 |
| 1 | SIM800C | Button_Switch_Keyboard:SIM800C | U3 |
The 34 most common of 38 parts.
Questions
How big is the Genv01 2 PCB?
It measures 98.8 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Genv01 2 use?
38 parts, built around the ATMEGA168PA-PU, SIM800C, IRM-20-5 and H11L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Genv01 2 KiCad files?
From the dimipapr/TalkyPump repository on GitHub, at the commit this page was made from: the board is KiCad/genv01_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Genv01 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dimipapr before reusing the design.
Similar boards
- 2 layers230.5 × 60 mm
- 2 layers40 × 50 mm
- 2 layers90 × 90 mm
- 2 layers123 × 87.3 mm
- 2 layers
Gsm electro socket
Wissemtriki/GSM-Socket-KiCad
PCB design project of a GSM socket using KiCad. Includes complete PCB layout, schematics, and project files, designed for GSM module integration in embedded systems and IoT applications.
23 parts - 2 layers120 × 68 mm
C64-PSU NA
wiretap-retro/C64-128-Power-Supply
This power supply is a simple design for the C64 or C128.
19 parts8 - 2 layers203.8 × 88.6 mm
Alim Eurorack
jojo-monk/eurorack-psu
DIY Eurorack power supply — 3× Meanwell IRM modules (±12V/5V) with LM350/LM337 linear regulation, KiCad design.
46 parts1