Skip to the content
2 layers70 × 49.5 mmStarbie, the printed circuit board in 3D

A small PCB project done with the help of the SharKingStudios/Starbie tutorial.

Size
70 × 49.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
24
Pads
75
Tracks, vias
115, 14
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Oct 2026
Updated
12 Oct 2026

Overview

Starbie is an open-source printed circuit board by Dhaneshbala, from the Dhaneshbala/Starbie-first-pcb-project- repository on GitHub. It is a 2-layer board of 70 × 49.5 mm with 17 parts on 24 nets, routed with 115 tracks and 14 vias.

It is built around the DHT11. Its parts include 6 resistors, 2 ICs, 2 diodes, 2 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Starbie- A tamagotchi and study agent

Screenshot 2569-10-12 at 9 14 22 AM

A small PCB project done with the help of the SharKingStudios/Starbie tutorial.

What is it?

Starbie is a tiny, motion-controlled digital pet. It is basically a desktop Tamagotchi with minimal gameplay buttons.It is also a mini study agent with features like Study timer Pomodoro OLED dashboard Environment monitor | Light monitor RGB status LED Buzzer alerts Tilt controls Session tracking

Project Details

  • Custom Hardware: A compact custom PCB designed for the Starbie digital pet.
  • Microcontroller: Seeed Studio XIAO ESP32-C3.
  • Display: A small display used to show Starbie's face, menus, and pet information.
  • Motion Control: The board uses movement and tilting to interact with Starbie.
  • Sensors: Sensors are used to detect movement and environmental information.
  • Interaction: Starbie responds to tilting and shaking, with a tilt-controlled radial menu and different pet behaviours.
  • Firmware: Arduino firmware runs on the XIAO ESP32-C3 and controls the display, sensors, and interactions.
  • PCB Design: The project includes the KiCad schematic and PCB layout files.
  • Manufacturing: The original project includes PCB fabrication files and a bill of materials.

Hardware

  • Microcontroller: Seeed Studio XIAO ESP32-C3
  • Display: SSD1306 0.96" I2C OLED *
  • Motion/Tilt: MPU6050 / GY-521 6-Axis IMU*
  • Climate: DHT11 Temperature & Humidity Sensor
  • Light: LDR (Light Dependent Resistor) + 10k pull-down resistor
  • Status Indicator: RGB LED (Common Cathode) + inline resistors (220/ 100 / 100)
  • Audio Alerts: Passive Buzzer driven by an NPN transistor & flyback protection diode
  • Buttons: 2 Tactile Buttons
  • Note on 3D Renders: The SSD1306 OLED and MPU6050 IMU are external plug-in sub-modules. They will not be visible on standard 3D PCB fabrication renders.

Parts

17
QtyValueFootprintReferences
2100Resistor_SMD:R_0805_2012MetricR3, R4
210KResistor_SMD:R_0805_2012MetricR5, R6
2SW_PushButton_Switch_SMD:Nidec_Copal_CAS-120ASW1, SW2
11KResistor_SMD:R_0805_2012MetricR1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
1220Resistor_SMD:R_0805_2012MetricR2
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1LDROptoDevice:R_LDR_5.1x4.3mm_P3.4mm_VerticalRV1
1LED_RGBKLED_THT:LED_D5.0mm-4_RGBD2
1Q_NPN_BECPackage_TO_SOT_SMD:SOT-23Q1
1XIAO-ESP32-C3-SMDImported Parts:XIAO-ESP32-C6-DIPU1

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Starbie PCB?

It measures 70 × 49.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie use?

17 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie KiCad files?

From the Dhaneshbala/Starbie-first-pcb-project- repository on GitHub, at the commit this page was made from: the board is Starbie/Starbie.kicad_pcb and its schematic Starbie/Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie design in my own project?

Its repository states no licence, so its author keeps all rights: ask Dhaneshbala before reusing the design.