2 layers33 × 45.7 mm
Ftdi pic ir
HelenFoster/ir-rc
The aim is to have a tiny transmitter which works with the OpenPandora without compromising on its handheld quality.
21 parts
2 layers50.8 × 50.8 mm
Luminaries
dewayne57/LuminariesLuminaries (simulated candles) that operate off 12V and have optional CDS photocell control
- Size
- 50.8 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 33
- Pads
- 89
- Tracks, vias
- 174, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Oct 2026
- Updated
- 17 Oct 2026
Overview
Luminaries is an open-source printed circuit board by dewayne57, from the dewayne57/Luminaries repository on GitHub. It is a 2-layer board of 50.8 × 50.8 mm with 41 parts on 33 nets, routed with 174 tracks and 33 vias.
It is built around the PIC12F683-E/P, AMS1117-5.0 and MMBT3904, with the SS34 among its other parts. Its parts include 17 diodes, 7 resistors, 4 connectors, 3 transistors and 2 capacitors. It belongs with the PIC boards of this library.
Main components
4
PIC12F683-E/P
PDIP-8-40℃~+125℃ 10bit 128Byte 20MHz 256Byte 2V~5.5V 3.5KB 5 8 Bit Built-in FLASH PIC PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | LED | LED_THT:LED_D5.0mm_IRGrey | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17 |
| 3 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R7 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 1 | 10 | Capacitor_SMD:CP_Elec_4x3 | C2 |
| 1 | 12V | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 47 | Capacitor_SMD:CP_Elec_10x10 | C1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | CDS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | PGM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PIC12F683 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
The 36 most common of 41 parts.
Similar boards
- 2 layers170 × 130 mm
JVCard
jamvanderloeff/JVC-input-card
A compatible clone input card for JVC (and some Ikegami and Panasonic) professional CRT monitors
77 parts6MIT - 2 layers74 × 55 mm
Rtl logic gates c2032-smd final
dlutz52/RTL-Logic-Gates-Solder-Kit
PCB of various logic gates inspired by Ben Eater created in Kicad.
61 partsGPL-3.0 - 2 layers100 × 100 mm
Power supply
gabrielfbdiniz/PFC-Boost-STM32
Conversor estático de potência CA/CC com Correção Ativa do Fator de Potência (Active PFC) na topologia Boost, projetado para elevar a tensão da rede elétrica retificada (127V / 220V AC) para um barramento CC…
89 parts - 2 layers57.1 × 53.3 mm
Hushbox fan control
mhoyer/hushbox-control
I tested esp32-idf4-20191220-v1.12.bin and esp32-idf4-20191220-v1.13.bin from https://micropython.org/download/esp32/.
34 parts - 2 layers27.9 × 101.6 mm
- 4 layers70.8 × 110 mm
- 2 layers87.6 × 63.5 mm
Questions
How big is the Luminaries PCB?
It measures 50.8 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Luminaries use?
41 parts, built around the PIC12F683-E/P, AMS1117-5.0, MMBT3904 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Luminaries KiCad files?
From the dewayne57/Luminaries repository on GitHub, at the commit this page was made from: the board is Luminaries.kicad_pcb and its schematic Luminaries.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Luminaries design in my own project?
Its repository states no licence, so its author keeps all rights: ask dewayne57 before reusing the design.