

Nixie-Pendant
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 12
- Pads
- 49
- Tracks, vias
- 134, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20241129)
- Created
- 21 Dec 2024
- Updated
- 7 Jan 2025
Overview
BMS is an open-source printed circuit board by devramsean0, from the devramsean0/Nixie-Pendant-Archived repository on GitHub. It is a 2-layer board with 19 parts on 12 nets, routed with 134 tracks and 4 vias.
It is built around the B1040W. Its parts include 5 capacitors, 3 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the power boards of this library.
Main components
1README
README.mdA DIY, wearable pendant made from an IN-16 and quite a few boards
[!CAUTION] This project contains high voltage electronics, It could concevably kill you and it will hurt. Don't leave children unnatended and exercise caution
Key Voltages
LV: 3.3v, HV: 170v
Planned electrical stackup
This is in order of closest to tube
- Socket PCB
- Control PCB
- High Voltage Generation PCB
- BMS board
- Programming/Charging board
- Battery
Folder Layout
bms/- Board files for the BMS (Battery Management System), handles lipo charging and safe discharge, usb & battery cutover and power regulation to the LV railsocket/- My bootleg IN-16 socket, very simple. just pads and holes. but like, this should hold the tube in (probably)PendantLib.pretty/- Shared part footprints
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_2x01_P1.00mm_Vertical | J1, J2, J3 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4K99 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | A03401A | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | B1040W | Diode_SMD:D_SOD-123 | D1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MountingHole | PendantLib:MountingHole_1.5mm | H1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SW_DPST_x2 | Connector_PinHeader_1.00mm:PinHeader_2x01_P1.00mm_Vertical | SW1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | ~ | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.5mm_EP0.6x1.37mm | U3 |
More from devramsean0/Nixie-Pendant-Archived
1- 2 layers

Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
What parts does the BMS use?
19 parts, built around the B1040W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS KiCad files?
From the devramsean0/Nixie-Pendant-Archived repository on GitHub, at the commit this page was made from: the board is BMS/BMS.kicad_pcb and its schematic BMS/BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS design in my own project?
Its repository states no licence, so its author keeps all rights: ask devramsean0 before reusing the design.