2 layers
2 layers
Nixie-Pendant
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 13
- Pads
- 26
- Tracks, vias
- 27, 0
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20241129)
- Created
- 21 Dec 2024
- Updated
- 7 Jan 2025
Overview
SOCKET is an open-source printed circuit board by devramsean0, from the devramsean0/Nixie-Pendant-Archived repository on GitHub. It is a 2-layer board with 14 parts on 13 nets, routed with 27 tracks and 0 vias.
README
README.mdA DIY, wearable pendant made from an IN-16 and quite a few boards
[!CAUTION] This project contains high voltage electronics, It could concevably kill you and it will hurt. Don't leave children unnatended and exercise caution
Key Voltages
LV: 3.3v, HV: 170v
Planned electrical stackup
This is in order of closest to tube
- Socket PCB
- Control PCB
- High Voltage Generation PCB
- BMS board
- Programming/Charging board
- Battery
Folder Layout
bms/- Board files for the BMS (Battery Management System), handles lipo charging and safe discharge, usb & battery cutover and power regulation to the LV railsocket/- My bootleg IN-16 socket, very simple. just pads and holes. but like, this should hold the tube in (probably)PendantLib.pretty/- Shared part footprints
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 1 | IN-16 | nixies-us:nixies-us-IN-16 | N1 |
Questions
What parts does the SOCKET use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SOCKET KiCad files?
From the devramsean0/Nixie-Pendant-Archived repository on GitHub, at the commit this page was made from: the board is SOCKET/SOCKET.kicad_pcb and its schematic BMS/BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SOCKET design in my own project?
Its repository states no licence, so its author keeps all rights: ask devramsean0 before reusing the design.
More from devramsean0/Nixie-Pendant-Archived
1Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
