Skip to the content
2 layers37.4 × 47.4 mmVoltage converter, the printed circuit board in 3D

Voltage converter

devbotas/pcb-wires-first

A wires-first home automation controllers

Size
37.4 × 47.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
14
Pads
50
Tracks, vias
68, 7
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 May 2026
Updated
29 Oct 2026

Overview

Voltage converter is an open-source printed circuit board by devbotas, from the devbotas/pcb-wires-first repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 37.4 × 47.4 mm with 25 parts on 14 nets, routed with 68 tracks and 7 vias.

It is built around the R-78C3.3-1.0. Its parts include 7 connectors, 3 capacitors, 2 resistors, 2 diodes and 1 IC. It belongs with the home automation and IoT boards of this library.

Main components

1

README

README.md

The Problem

Wireless IoT sucks.

It's unreliable and breaks all the time. There's not such thing as reliable, maintenance-free, wireless IoT.

If it runs on batteries - that's even worse.

Another problem - central IoT hubs. If those break, lose connection, decides to reboot ar whatever - my smart house immediatelly becomes non-functional.

The Solution

Put the analog wires first! So that light switches continue to operate even if smart features decide to stop working.

The Boards

Gateway

This is a simple carrier board for WizNET W55RP20 development module. It cannot do much by itself - maybe blink some LEDs. Real functionality (and also power) should come from the JST PH headers.

Can be mounted on M or L size Holey board.

Voltage converter

Takes 12-24V input (technically, 5-70V, but these voltages may not be supported on the other modules that this one is supposed to power) and creates 3.3V output so Gateway or other low power modules could be connected through the JST XH connector. Additionally, there are multiple JST VH connectors, which act as a power switch to connect multiple power hungry modules, like the Switcher.

Two can be mounted on a single Holey-S board.

Switcher

Originally meant to control LED lights, but it can switch anything. It has one switchable 12/24V output (should be able to handle 4A). Output can be controlled simultaneously in multiple ways:

  • ON wire: shorting this to GND for 100ms will turn the switch on.
  • OFF wire: shorting this to GND for 100ms will turn the switch off.
  • TGL wire: shorting this to GND for 100ms will toggle the switch.
  • I2C directly: software based commands that can turn switch on or off and read the current state.

The idea here that ON/OFF/TGL signals could be wired to the physical wall switches directly, any smart features being entirely optional. So the switch will operate as a dumb-switch.

Renesas HVPAK SLG47115 chip serves both as a high-power switch and an input sanitizer. For example, if faulty hardware shorts ON signal to GND permanently, OFF and TGL signals continue to operate normally.

Two can be mounted on a single Holey-S board.

Holey boards

These are very handy to mount modules listed above, or maybe anything. They have a grid of 3.2mm diameter holes (hence the name) on a 5mm grid. They work perfectly with any M3 mounting hardware and come in the following sizes:

  • L - 160x100 mm
  • M - 100x80 mm
  • S - 80x40 mm

So, one M board can fit exactly two S boards, and one L board can fit exactly 2 M boards. This allows some neat and functional arrangement.

Parts

25
QtyValueFootprintReferences
5Conn_01x02Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_VerticalJ1, J2, J3, J4, J5
4MountingHoleMountingHole:MountingHole_3.2mm_M3_NoCopperH1, H2, H3, H4
3NetTie_2NetTie:NetTie-2_SMD_Pad0.5mmNT1, NT2, NT3
2~Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ6, J7
110μF/4AInductor_SMD:L_Bourns_SRP7028A_7.3x6.6mmL1
110μF/50VCapacitor_SMD:C_1206_3216MetricC1
12.2kResistor_SMD:R_0603_1608MetricR2
13V3Diode_SMD:D_0603_1608MetricD2
14.7μF/16VCapacitor_SMD:C_0603_1608MetricC3
14.7μF/50VCapacitor_SMD:C_1206_3216MetricC2
16.7kResistor_SMD:R_0603_1608MetricR1
1GNDTestPoint:TestPoint_Keystone_5019_MiniatureTP1
1HVDiode_SMD:D_0603_1608MetricD1
1R-78C3.3-1.0Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THTU1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1

More from devbotas/pcb-wires-first

2
  • 2 layers37.4 × 47.4 mmSwitcher, the printed circuit board in 3D

    Switcher

    devbotas/pcb-wires-first

    A wires-first home automation controllers

    41 partsCERN-OHL-S-2.0
  • 2 layers47.4 × 77.4 mmGateway, the printed circuit board in 3D

    Gateway

    devbotas/pcb-wires-first

    A wires-first home automation controllers

    27 partsCERN-OHL-S-2.0

Similar boards

  • 4 layers74 × 28 mmOpenFlowMeter, the printed circuit board in 3D

    OpenFlowMeter

    JochiSt/OpenFlowMeter

    Measuring Flow

    156 parts6GPL-3.0
  • 6 layers72 × 42 mmBeijing A, the printed circuit board in 3D

    Beijing A

    grodansparadis/vscp-din-wireless-esp32-beijing

    38 parts1MIT
  • 2 layers128.5 × 49.3 mmSupply Power, the printed circuit board in 3D

    Supply Power

    Alexandr-Filatov/Hydrogen-PCB-SupplyPower

    37 parts
  • 2 layers152.4 × 63.5 mmNixieClock MainBoard, the printed circuit board in 3D

    NixieClock MainBoard

    JakobThiessen/NixieClock

    Wichtig: Ohne Änderung tut die SD karte nicht. (Betrifft nur V2.0 in der V2.1 sind die Änderung im Layout schon umgesetzt)

    111 parts
  • 2 layers34.1 × 42 mmDoorbell, the printed circuit board in 3D

    Doorbell

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    25 parts10
  • 2 layers19.7 × 99.7 mmSen, the printed circuit board in 3D

    Sen

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    54 partsGPL-3.0
  • 4 layers76.2 × 71.1 mmAnalog Controller, the printed circuit board in 3D

    Analog Controller

    kyledenobel/RGA_Boards

    PCB Board design and development for RGA (Recording Guitar Amplifier)

    77 parts
  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0

Questions

How big is the Voltage converter PCB?

It measures 37.4 × 47.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Voltage converter use?

25 parts, built around the R-78C3.3-1.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Voltage converter KiCad files?

From the devbotas/pcb-wires-first repository on GitHub, at the commit this page was made from: the board is pcb/voltage-converter/voltage-converter.kicad_pcb and its schematic pcb/gateway/gateway.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Voltage converter design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).