
RC KiCAD
dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.

Documentation et code source de FabRice, le robot Autonome.
FullSize PCB Template is an open-source printed circuit board by dev-campusfab, from the dev-campusfab/FabRice repository on GitHub, published under the MIT licence. It is a 2-layer board of 125 × 125 mm with 10 parts on 5 nets, routed with 2 tracks and 0 vias.
Its parts include 2 resistors and 2 connectors. It belongs with the robots and motor control boards of this library.
 (La Phase 1 de développement a été financé par la CVEC)
FabRice est un projet open-source développé par une équipe d'étudiants de l'Université UT3 Paul Sabatier. Il s'agit d'un robot modulaire autonome actuellement en phase 1 de développement sur un total de 3 phases. FabRice est créé à partir de zéro, avec la majorité de ses composants et pièces conçus sur mesure. Notre objectif principal est d'apprendre à rechercher, créer, penser et appliquer des connaissances dans un projet réel.
La Phase 1 de développement de FabRice se concentre sur les objectifs suivants :
# Cette partie est encore en développement.
Arduino IDE > Sketch > Include Library > Manage Libraries > Rechercher et installer :
- Adafruit Motor Shield
- Wire
- SPIgit clone https://github.com/carpuplay/FabRice.gitArduino IDE > Tools > Board > Sélectionnez votre carte
Arduino IDE > Tools > Port > Sélectionnez le port correspondantArduino IDE > Sketch > UploadNous sommes ouverts aux contributions ! Si vous souhaitez contribuer à FabRice, veuillez suivre ces étapes :
git checkout -b feature/nouvelle-fonctionnalité)git commit -m 'Ajouter une nouvelle fonctionnalité')git push origin feature/nouvelle-fonctionnalité)Ce projet est sous licence MIT. Consultez le fichier LICENSE pour plus de détails.
Si vous avez des questions ou des suggestions, n'hésitez pas à ouvrir un issue ou à nous contacter directement.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | green led | LED_SMD:LED_0805_2012Metric | 5V, 12V |
| 1 | 12V_IN | Footprints:PHOENIX_1984963 | J2 |
| 1 | 150 | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 450 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 5V_IN | Footprints:PHOENIX_1984963 | J1 |

dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.

dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 125 × 125 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dev-campusfab/FabRice repository on GitHub, at the commit this page was made from: the board is Archive/PCB_ROBOT/FullSize PCB Template/FullSize PCB Template.kicad_pcb and its schematic Archive/PCB_ROBOT/FullSize PCB Template/FullSize PCB Template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).