Skip to the content
2 layers36.1 × 27.1 mmTapeAdapter, the printed circuit board in 3D

Windows/Arduino tool for writing and reading C64 Tapecart modules

Size
36.1 × 27.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
6
Pads
28
Tracks, vias
35, 0
Routed
Yes
KiCad
KiCad 4
Created
30 Jul 2018
Updated
3 Sep 2019

Overview

TapeAdapter is an open-source printed circuit board by detlefgerhardt, from the detlefgerhardt/TapecartFlasher repository on GitHub, published under the MIT licence. It is a 2-layer board of 36.1 × 27.1 mm with 6 parts on 6 nets, routed with 35 tracks and 0 vias.

README

KiCAD/readme.md

This is a simple C64 tape adapter I made to connect the Tapecart modul to Arduino.

Here is another adapter: https://oshpark.com/shared_projects/esQ330QI

Please note that with these passive adapters the motor line is only driven with 5 volts instead of 6-7 volts. This adapter works with my Arduinos and with my Tapecart modules. It is not certain that this will work with any combination of Arduino and Tapecart moduls.

Parts

6
QtyValueFootprintReferences
4Mounting_Holes:MountingHole_3.2mm_M3_DIN965, , ,
1dg:Pin_Header_Straight_2x06_Pitch2.54mm_CBM_Tape_Pinheader
1dg:CBM_Edge_2x6_3_96mm

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the TapeAdapter PCB?

It measures 36.1 × 27.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TapeAdapter use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TapeAdapter KiCad files?

From the detlefgerhardt/TapecartFlasher repository on GitHub, at the commit this page was made from: the board is KiCAD/TapeAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TapeAdapter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).